7.IntelliNova智能监控系统.ppt

Commander UnitConnections and Indications On/Off LED Power supply 18-36 V DC On/Off switch (breaks power) ”Unit is operative” LED ”Unit has a LINX connection” LED 4 general digital outputs 4 RPM or digital inputs RS232 connection used for test/calibration Ethernet connection SD memory with read/write LED Technical Highlights General Up to 32 channels/Unit: vibration, SPM, analogue in 4-20mA/0-10V and analogue out (groups of 8) Bearing Monitoring Units and Analogue Monitoring Units are processed in parallel (not syncronized) while Vibration Measurements and SPM Spectrum measurements requires the common DSP resource Monitoring Modules can be mixed freely on a commander unit All measuring units are calibrated separately and can be handled separately * System architecture Commander Unit Vibration Unit Vibration Unit Bearing Unit Bearing Unit Commander Unit Vibration Unit Bearing Unit Bearing Unit Analog Unit (in) Commander Unit Vibration Unit Analog Unit (out) VCM CMS Portable Field Support Software (FSS) Service Laptop LINX Ethernet/SD card OPC Server OPC Client Process Control System OPC Client Data Access Customer Systems Ethernet LINX Link between the Database and The Commander Units Data Base OPC Server Commander Unit (CU) Basic Building Blocks Bearing Monitoring Unit Vibration Monitoring Unit Analog Output Unit Analog Monitoring Unit Digital Signal Processor DSP Memory SPI SD Memory Up to 2GB Real Time Clock Master CPU SPI Ethernet Controller Ethernet Analogue Signals Vibration or Enveloped SPM Signals Digital In RPM RPM For DSP 4 X RPM 4 X Status Output (Open Drain) Operating Communication Vibration Monitoring Unit 8 X VIB In Analog Output Unit 8 X 4-20mA Out 18 – 36 VDC Commander Unit System Architecture I2C I2C I2C Bearing Monitoring Unit 8 X SPM In (40/42 000) Micro Controller Analog Monitoring Unit 8 X 4-20mA In 2 X 0-10V In Micro Controller Bearing Monitoring Unit 8 multiplexed channels dBm/dBc, LR/HR and SPM Spectrum dBm