柞蚕丝素聚乳酸复合膜的制备及性能研究.pdf

142 2010, Vol. 31, No. 24 食品科学 ※工艺技术 付田霞，战孟娇，王新现 (沈阳农业大学食品学院，辽宁 沈阳 110866) 　　　　　　　　　　　　 利用溶液共混法将柞蚕丝素添加到聚乳酸基体中，制备柞蚕丝素/ 聚乳酸复合膜，研究柞蚕丝素对聚乳酸 塑料性能的改善。结果表明：柞蚕丝素 / 聚乳酸复合膜的成膜特性受制备柞蚕丝素所需磷酸水解时间、柞蚕丝素 水溶液质量分数、干燥温度、增塑剂聚乙二醇(400)添加质量分数等因素的影响；在添加磷酸水解 3h 的柞蚕丝素水 溶液的质量分数 2% 时制备的柞蚕丝素/ 聚乳酸复合膜表现出的综合性能指标较好，其拉伸强度 19.75～23.89MPa 、 断裂拉伸应变37.42%～48.20% ，具有优异的防水阻油性能；在添加磷酸水解 1h 的柞蚕丝素水溶液(质量分数 4%) 时 制备的复合膜对 UV-B 区间的紫外遮蔽效果最好，紫外线透过率仅为9.4%～12.7%。经红外光谱测试，柞蚕丝素 与聚乳酸基体复合效果良好。 ：聚乳酸；柞蚕丝素；复合膜 Preparation and Properties of Antheraea pernyi Silk Fibroin-Polylactic Acid Composite Film 　　　　　　 FU Tian-xia ，ZHAN Meng-jiao ，WANG Xin-xian (College of Food Science, Shenyang Agricultural University, Shenyang 100866, China) Abstract ：A kind of ApSF-PLA composite film was prepared by adding Antheraea pernyi silk fibroin (ApSF) to polylactic acid (PLA) matrix through solution blending method. The effect of ApSF on the properties of PLA plastics was investigated. The results showed that the characteristics of ApSF-PLA composite film were affected by phosphoric acid hydrolysis time of ApSF, ApSF-water ratio, drying temperature, and plasticizer PEG-400 addition amount. The optimal preparation conditions were phosphoric acid hydrolysis time for ApSF of 3 h, ApSF-water ratio of 2%. Under the optimal conditions, the ApSF-PLA composite film exhibited better comprehensive properties with tensile strength of 19.75 －23.89 MPa, and tensile strain of 37.42%－48.20%. The film also revealed better waterproof and anti-oil performance. Moreover, the ApSF-PLA film exhibited the best UV-shielding effect in UV-B range when ApSF-water ratio of 45 and phosphoric acid hydrolysis time of 1 h. UV transmittance of the prepared composite film at the optimal