windows快速启动栏修复方法图解.doc

Windows 7 里的快速启动栏到哪里去了？Windows7 快速启动栏修复方法 许多网友一定记得在 Windows 7 之前的 Windows 系统都有个快速启动(quick launch)区域。比如 IE 浏览器、Windows Media Player 程序可以在里面快速启动。 图1 　　收起这个图片展开这个图片Windows 7 全新的任务栏 　　其实，Windows 7 里面虽然取消了快速启动，但是快速启动的功能仍然存在。你可以把常用的程序放在任务栏里，要用的时候一样可以方便打开。 　　你可以把你想要的程序加到任务栏中：（右键点这个程序或者是快捷方式，选锁定到任务栏。也可以把程序拖到任务栏。） 图2 　　这个图片如何找回 Windows XP 样式的快速启动栏 　　1.在任务栏上右键 - 工具栏 - 新建工具栏。 图3 　　2.在文件夹里面输入这个路径，然后按回车：　　%userprofile%\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch 图4 　　3.在任务栏上空白处右键，把锁定任务栏的勾去掉。然后在 Quick Launch 的位置右键，把显示文本和显示标题的勾全部去掉。 图5 　　4.现在任务栏已经解锁。我们可以自由的拖动上面的东西。稍微用点力，需要乾坤大挪移一下。把快速启动栏往左拖到不能再拖的位置。然后把任务栏往右拖，快速启动栏自动就到了最左边。 图6 　　5.现在原先的任务栏中还有不少程序。你可以一一将它们去掉。右键点程序图标，选将此程序从任务栏解锁。 图7 　　6.最后，把任务栏锁定就全搞定了。 图8 or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and