超市店开业促销系列活动策划总方案.doc

**超市**店开业促销系列活动策划总方案媒体宣传：电视宣传：开业前天选择当地收视率较高的“电视台”，在黄金时段发布新店开业信息形象宣传. 新闻发布会于新店开业前，各大新闻媒体记者，召开．氢气球　（）．店外宣传A． 庆贺条幅B． 有关单位庆贺花篮C． 巨幅D． 彩色气球E． 彩旗F． 拱形门　G． 小彩灯I ．．．．店内宣传：．主通道悬挂POP及彩色气球．特价台布置．促销区布置．DM海报E．店出、入口布置．扶手梯及侧面墙壁： H．收银台悬挂彩色气球　　　　　．店门口设DM海报信息栏 ．店门口设“店长推荐商品”（周末）信息栏四：00　 场景布置完毕：10　 调试音响7：　 播放音乐：　 开始迎宾7：　（宣布店正式开业）！舞狮队五促销活动：．）低价商品促销. 门口供应商场外配合的促销活动店开业海报(P)300个商品。20000份。（营销部） 商品分布：生鲜50个、服装、箱包、鞋帽50个、低价商品促销 position for future reference. Installation using special lifting pole rotor 6.4.4.6 rotor lift, box spirit level to check the rotor axis neck of Yang, on both sides of the rotor should be lateral raises and numerical deviation of ≤ 0.10MM, qualified before the official lifting. Hoisting of the rotor dynamic and static clearance should be measured, rotors check clearance to prevent rotor colliding. 6.4.4.7 stationary blade carrier, diaphragm and sealing upper cylinder on the inside and install the mounting bolts, bolts and bolt holes in the surface should be coated with molybdenum disulfide. Follow the manufacturers stamp marked to install good sealing ring and spring. Check the sealing ring and spring plate, shall conform to the technical requirements manufacturers drawings. Bolt: ... Measurement with measurement tools, special tools, temporary connection bolts and connection tool equipped and in good condition. The rotor shaft to have fixed, such as thrust, bearing plates fixed installation, in case of wear of the rotor is too large. The coupling gasket check measurements: measured data processing according to gasket, clean the coupling gasket surface clean and Burr-free, check the coupling gasket thickness data, shim thickness deviation of ≤ 0.02mm, parallel degree deviation of ≤ 0.02mm. Coupling temporary bolts ready: preparing 4-8 bolt diameter coupling bolt hole diameter 0.5-1.0mm. 6.4.5.2 shaft coupling 6.4.5.2.1 General requirements in both the relative position of the flange according to the manufacturers mark, if there is n