workbench电磁学浅析.ppt

Solution Results Vector Contour Plots 矢量/轮廓在解决对象选择”的定义”或结果的工具栏 Vector Plots 箭向量地块规模,2 D / 3 D箭,箭密度可以定义允许优秀的图形化的电磁场 Inductance Flux Linkage 解枝可以插入电感、磁链标杆处理计算。自我与互感是计算。 Parameter Sweeps 分析了Emag可以完全参数化,用户可以轻松的力量或转矩与提取转子位置等. Parameter Sweeps Graph of results automatically created. END * The Enclosure tool is used to enclose the bodies of a model in a material typically required for an Emag analysis. If a full model is used, symmetry planes will slice the model and discard the unused geometry, then enclose the symmetry model with an enclosure * * The Enclosure tool is used to enclose the bodies of a model in a material typically required for an Emag analysis. If a full model is used, symmetry planes will slice the model and discard the unused geometry, then enclose the symmetry model with an enclosure * Winding Bodies: Used to represent wound coils for source excitation. They are defined from line bodies. The advantage of these bodies is that they are not 3D CAD objects, and hence simplify modeling/meshing of winding structures. The winding bodies are easy to use representations of SOURC36 elements. * Solid Conductor: Voltage Current Density Anything else: Field Force Torque Inductance Flux linkage * * Feature: Air Gap Mesh sizing. As for other mesh controls, air gaps are assigned under Advanced Controls in the Mesh Detail. Face pairs containing the air gap are automatically located. Gap size face pairs are identified on model for easy verification. Gap aspect ratio and gap mesh density may be selected per pair. ANSYS, Inc. Proprietary ? 2004 ANSYS, Inc. ANSYS, Inc. Proprietary ? 2004 ANSYS, Inc. ANSYS Workbench 9.0 ElectromagneticsPaul Lethbridge Contents 工作台电磁学 工作台Emag路线图 设计建模者 外壳对称 绕组的身体 蜿蜒的工具 仿真 Workbench Emag Roadmap 如果Emag能力将会被暴露在几个释放的循环: 三维静磁学(9.0) 三维电流传导(10.0) 三维静电的元件 时间和二维瞬态 工作台是第一个版本v9.0电磁分析能力。 支持(伤口)固体和滞留导体 自动计算力、扭矩、电感,线圈磁链。 容易设置模拟计算结果,作为一个功能的电流,中风或转子位置角。 工作台Emag能力和可通过映射到: ANSYS Emag(独立或使任务) ANSYS Multiphysics许可证。 Workbench Emag