Pass4SideJN0-130题库.doc

Exam : Juniper JN0-130 Title : Juniper? Juniper Networks Certified Internet Specialist.e(JNCIS-E) Version : Demo 1. Which CLI command is used to set a Privileged Exec password of mypassword? A. enable password 0 mypassword B. enable password 3 mypassword C. enable password 5 mypassword D. enable password 10 mypassword Answer: A 2. You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs each interface is using. Which CLI command displays this information? A. show fast interface B. show vlan interface C. show vlan subinterface D. show fast interface vlan Answer: C 3. Why would you make a non-backbone area a stub or not-so-stubby area? A. to aggregate routes learned from the ABR B. to lower the cost of routes advertised by the ABR C. to connect a non-contiguous area to the backbone D. to decrease the size of the link-state database in that area Answer: D 4. Which configuration command places interfaces whose IP addresses are between and 55 into OSPF area 0? A. network area B. network 55 area C. area network D. area network 55 Answer: B 5. Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and why? A. It is Static. If the priorities are equal for a new neighbor and the current DIS only. B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only. C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it is elected as the DIS. D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a higher priority, it may become a backup DIS. Answer: C 6. Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection configuration? (Choose two.) A. AS Path B. Next Hop C. Cluster List D. Originator ID Answer: CD 7. Which two types of routes may be advertised via EBGP? (Choose two.