意大利菲亚特油封试验标准.pdf

ROVER ENGINEERING STANDARD RES.57.02.507 Issue No. 5 Title: Oil Seal Durability Published: January 1996 Implementation Date: February 1996 CONTENTS 1 Purpose of Standard 10 High Speed test (Rig) 2 Scope of Standard 11 Static Head Test 3 Test Programme 12 Cold Start Test 4 Preparation and Equipment - Rigs 13 Cold Stationary Deflection Test 5 Preparation and Equipment - Vehicle 14 Water Ingress Test 6 Age Hardening Test 15 High Speed Test (Vehicle) 7 Dry Run and Efficiency Test 16 Acceptance 8 Alternate Rotation Test 17 Reporting 9 Stop / Start Test 18 Abbreviated Test Appendix ‘A’ Test Parameters Appendix ‘B’ Static Head Fixture Appendix ‘C’ Cold Start Fixture Related documents :- RES.57.02.501 Automatic Transmission and Driveline Tests RES.57.02.503 Manual Transmission and Driveline Vehicle Durability Tests RES.57.02.508 Oil Seal Durability (Abbreviated) RES.22.RU.28 Solid Rubber Mouldings, Fuel Oil and Heat Resistant 1 PURPOSE OF STANDARD 1.1 To ensure that prototype and first off samples are adequately designed and produced to meet service requirements when operated in the manner intended. 2 SCOPE OF STANDARD 2.1 This Standard is intended to apply to all oil/grease seals used in driveline