ansys中GETnode中文解释.docx

*GET Preprocessing Items, Entity = NODE 2008年11月13日 星期四 14:35*GET Preprocessing Items, Entity = NODEEntity = NODEENTNUM = N (node number)（节点号）*GET, Par, NODE, N, Item1, IT1NUM, Item2, IT2NUMItem1IT1NUMDescriptionLOCX, Y, ZX, Y, Z location in the active coordinate system. Alternative get functions: NX(N), NY(N), NZ(N). Inverse get function. NODE(x,y,z) returns the number of the selected node nearest the x,y,z location (in the active coordinate system, lowest number for coincident nodes).返回节点N在活动坐标系中的X,Y,Z坐标值。或是用函数：NX(N),NY(N),NZ(N).ANGXY, YZ, ZXTHXY, THYZ, THZX rotation angle.（转角）NSELSelect status of node N: -1=unselected, 0=undefined, 1=selected. Alternative get function: NSEL(N).节点N的选择状态：-1=未选择，0=未定义，1=选择了。同样功能的函数：NSEL(N)NXTHNext higher node number above N in selected set (or zero if none found). Alternative get function: NDNEXT(N).在选择集中，比N大的下一个节点编号（如果没有的话则为0）同样功能函数：NDNEXT(N)NXTLNext lower node number below N in selected set (or zero if none found).在选择集中，比N小的下一个节点编号（如果没有的话则为0）FFX, MX, ...Applied force at selected node N in direction IT1NUM (returns 0.0 if no force is defined, if node is unselected, or if the DOF is inactive). If ITEM2 is IMAG, return the imaginary part.在IT1NUM方向上对节点N施加的力。（如果没有事先定义“力”，则返回0.0，如果没有事先选择节点，或自由度没有激活，也返回0.0）DUX, ROTX, ...Applied constraint force at selected node N in direction IT1NUM (returns a large number, such as 2e100, if no constraint is specified, if the node is unselected, or if the DOF is inactive). If ITEM2 is IMAG, return the imaginary part.在IT1NUM方向上对节点N施加的约束力。（如果没有事先指定约束，则返回一个很大的数（像2的100次方），如果没有选择节点或自由度没有激活，同样也会返回一个很大的数）。如果ITEM2是IMAG,则返回虚构的部分。HGENHeat generation on selected node N (returns 0.0 if node is unselected, or if the DOF is inactive).在选择的节点N上生成热（如果没有节点没选中或自由度没有被激活，返回0.0）NTEMPTemperature on selected node N (returns 0.0 if node is unselected)CPSLabCouple set number with direction Lab = any active DOF, which contains the node N.带有方向库=任意激活的自由度的耦合集编号，这个耦合集里包含有N。Entity = NODEENTNUM = 0 (or blank)*GET, Par, NODE, 0, Item1, I