Forewin_Presentation-WZ.ppt

Main Test Equipment Specification: Name: Metallographic Microscope Usage: Thickness of PTH, PI Oil; Layer，Quality of Hole wall, Top layer Copper,Material structure 说明: 设备名称：金相显微镜 用途:沉铜的厚度、孔壁质量、物质结构、PI油墨厚度以及外层铜的厚度的检测 Specification: Name:X-ray Thickness Instrument Usage: For Au, Ni, Sn, Cu, Ag, etc.thickness Accuracy: microinch 说明： 设备名称：厚度检测仪 用途: 镍、金、锡、铜、银等厚度的检测 测量精度: 微英寸 Main Test Equipment Specification: Name:Heat bonding machine Press: 0.1-0.14Pa Time : 12-18″ Temperature:300-320℃ 说明: 设备名称:热帮定机 压 力: 0.1-0.14Pa 时 间 : 12-18″ 温 度:300-320℃ Specification: Name:Peeling Resistance Tester Usage: For Pull strength of Material Test Angle: 90 -180° Speed: 50mm/minute 说明: 设备名称:拉力测试机 用途: 测试材料的拉力强度 测试角度: 90 -180° 上升速度: 50mm/minute Main Test Equipment Specification: Name:: Moblie Folder tester Frequency:50 circles/M Standard:100,000 circles 说明 设备名称:: 手机板弯折测试机 频 率:50 次/分 测试标准:100,000 次 Specification: Name:2 Dinmensional Instrement Usage: Board Size, Round, Arc, Point to Point Accuracy: 0.01mm 说明： 设备名称:2次元测量仪 用 途: 样品尺寸、圆 、弧、点与点等尺寸测量 测量精度: 0.01mm Forewin Strategy Forewin profile Forewin History 2003 Forewin Founded Forewin History 2003 2004 Qualified by ISO9001:2000 Qualified by FPC Forewin History 2003 Qualified by FPC Kelink SMT company founded 2004 2005 Forewin History 2003 Set up SST (Surpass Sony Team) FPC, popularize standard die Qualified by FPC 2004 2005 2006 Forewin History 2003 Qualified by ISO14001:2004 Qualified by FPC Qualified by FPC 2004 2005 2006 2007 Forewin History 2003 Succeed in RD of FPC microvia etching technology Succeed in RD of Dry film, Etching, Pre-paste Coverlay, Cutting etc processing Roll to Roll device. Qualified by FPC 2004 2005 2006 2007 2008 Forewin History 2003 Qualified by ISO / TS 16949:2002 Qualified by FPC Quali