Solidworks 2014 术语(中英文对照).docx

英文词中文词英文解释中文解释absorbed吸收A feature, sketch, or annotation that is contained in another item (usually a feature) in the FeatureManager design tree. Examples are the profile sketch and profile path in a base-sweep, or a cosmetic thread annotation in a hole.包含在?FeatureManager?设计树另一项目（通常是特征）中的特征、草图、或注解。例如，直孔中基体扫描或装饰螺蚊线注解中的轮廓草图和轮廓路径。align对齐Tools that assist in lining up annotations and dimensions (left, right, top, bottom, and so on). For aligning parts in an assembly, see mate.有助于排列注解和尺寸（左对齐、右对齐、上对齐、下对齐、等）的工具。有关在装配体中对齐零件，请参阅配合。alternate position view交替位置视图A drawing view in which one or more views are superimposed in phantom lines on the original view. Alternate position views are often used to show range of motion of an assembly.一个或多个视图以幻影线叠加于原有视图之上的工程视图。交替位置视图常用于显示装配体的运动范围。anchor point定位点(1) The end of a leader that attaches to the note, block, or other annotation. See attachment point. (2) Sheet formats contain anchor points for a bill of materials, a hole table, a revision table, and a weldment cut list.(1) 附加到注释、块、或其它注解的引线端点。另请参阅附加点。(2) 图纸格式包含材料明细表、孔表、修订表、以及焊件切割清单的定位点。annotation注解A text note or a symbol that adds specific design intent to a part, assembly, or drawing. Specific types of annotations include note, hole callout, surface finish symbol, datum feature symbol, datum target, geometric tolerance symbol, weld symbol, balloon, and stacked balloon. Annotations that apply only to drawings include center mark, annotation centerline, area hatch, and block.给零件、装配体或工程图添加特定设计意图的文字摘要或符号。特定类型的注解包括注释、孔标注、表面粗糙度符号、基准特征符号、基准目标、形位公差符号、焊接符号、零件序号以及层叠零件序号。只应用于工程图的注解包括中心符号线、注解中心线、区域剖面线以及块。appearance callouts外观标注Callouts that display the colors and textures of the face, feature, body, and part under the entity selected and are a shortcut to editing colors and textures.在所选的项目下显示面、特征、实体和零件的颜色和纹理的标注，是一种编辑颜色和纹理的快捷方式area hatch区域剖面线A crosshatch pattern or fill applied to a selected face or to a closed sketch in a drawing. See crosshatch.应用到一所选的面或工程图中一关闭的草图上的剖面线样式或填充。另请参阅剖面线。assembly装配体A