Producttraining.ppt

Paint consist of: Binder Colour pigment Extenders Solvents Additives Composition of paints The Composition of Antifoulings Binder Biocide Extenders Pigments Solvents Additives 防污漆 粘结剂：氯化橡胶，乙烯，丙烯酸, 毒料： TBTO， TBTF, CuPT, Cu2O 逐步释放毒料 The AF range SeaQuantum Plus SeaQuantum Classic SeaQuantum FB SeaQueen SeaPrince SeaGuardian Sargasso Super Tropic Main RMs: 09436—4-10% 08482—14-16% 02047—23-24% 03331—25-50% 01950—2.5% 04304—0.4% 04305—4.2% 04306—0.5% TBT-FREE TECHNOLOGY Time-Line - New IMO Regulations Product information - SeaQuantum Mode of Action SeaQuantum vs Seamate Both systems dissolve chemically by hydrolysis SeaQuantum - Polishing effect Competitor - Polishing effect Hydrolysis The chemical reaction by hydrolysis of the resin is the key property with regards to design of a self polishing, self smoothing and predictable AF product. Hydrolysis is understood as the chemical reaction, transferring the resin, preferably only on the surface layer of the AF paint, from being water insoluble to dissolve in sea water. SeaQuantum - the Benefits Constant linear polishing rate Maintains long term anti-fouling properties Improves the smoothness of the paint film surface Reduces consumption of fuel oil Environmentally acceptable Non harmful unique silyl-polymer Environmentally acceptable active ingredients Decrease volume of exhaust gases produced Meets the requirements of the draft IMO regulations SeaQuantum, the Benefits High build coating Allows for the application of high dry film thickness Application of anti-fouling systems for up to 60 months Good recoatability Virtually no limit to over-coating - Ease of over-coating means time and cost savings SeaQuantum vs Competitors SeaQuantum - Product comparison SeaQuantum – Product comparison SeaQuantum vs. Competitors SeaQuantum vs. Competitors Regulations SeaQuantum can be applied in all the major D/D and Newbuilding countries in the world (85% volume). However a number of countries in the world requi