Acrobat 空气化工对瘪桶的分级要求.pdf

Standard Guideline for Classification of Damage Packaging 分辨破损包装的基本原则 分辨破损包装的基本原则 Bungs Top Chime 桶盖 顶部桶边 Side Wall 桶身 Rolling Hoop 桶箍 Bottom Chime 底部桶边 Main Concerns 主要判断依据  Bungs are not compromised and become difficult to open or spout cannot be inserted 桶盖受到影响，很难打开或插入水 龙卷/龙头  Hoop no crack no sharp point 桶箍没有裂痕或没有尖锐点凸 起  Seam is intact 桶身焊接缝完整无损  Chime integrity is not comprised 顶部及底部桶边完整，未受 损 1 1st Degree Damage: Acceptable for Shipment 一级损坏 : 可接受 / 可以直接发给客户 a. Chimes was slightly dented, the length along the chime is less than 20cm. 桶边轻微凹陷，受影响桶边直线距离小于20cm; b. Rolling hoop was slightly dented, the length along the hoop is less than 20cm. 桶箍轻微凹陷，受影响桶边直线距离小于20cm ； c. The side wall was slightly dented, the dent area size is less than 400cm2 (20*20cm). 桶身轻微凹陷，凹陷尺寸小于400cm2(20*20cm) Seam slightly dented but no damage. 桶焊接边轻微凹陷, 但未 造成损坏 Dent near chime, it is slightly bent but unaffected. No difference in this part of chime vs. other parts 桶边轻微凹陷但对 桶边无影响 Bung area slightly budged but no impact Small dents but no structural damage, no metal