WSSL-108Y23增强尼龙6.docVIP

WS SL-108Y23 增强尼龙6 产品技术说明 1、用途及适用范围 WS SL-108Y23增强尼龙6是以尼龙6、玻璃纤维等主要原料经共混挤出改性而制成的产品。本产品主要用于注塑成型电子电器配件、电动工具壳体、配件、汽车配件、管道配件、滑轮等。 2、物理机械性能 序号 测试项目 检测标准 测试条件 单位 测试数据 1 纤维含量 GB/T2577-2005 — wt% 20-23 2 外观 — — — 白色 3 比重 GB/T1033.1-2008 23℃ g/cm3 1.21 4 熔体流动速率 GB/T3682-2000 235℃/2.16kg g/10min 13 5 拉伸强度 GB/T1040.2-2006 23℃ MPa 128 6 弯曲强度 GB/T9341-2008 23℃ MPa 182 7 弯曲模量 GB/T9341-2008 23℃ MPa 5300 8 断裂伸长率 GB/T1040.2-2006 23℃ % 5.6 9 悬臂梁缺口冲击强度 GB/T1843-2008 23℃ KJ/m2 15 10 热变形温度 GB/T1634.2-2004 1.82MPa ℃ 196 11 燃烧性能 UL94 1.6mm — HB 注：数据仅供参考 3、质量规格 外包装为纸塑复合袋或塑料编织袋，净重25㎏/袋 4、储运条件 常温、干燥条件下储运。储运过程中谨防日晒、雨淋和受潮。 WS SL-108Y23 Reinforced nylon 6 Product Description 1、Product Introduction WS SL-108Y3 is a glass fiber reinforced nylon 6 produced by mainly blending nylon 6 and glass fibers using co-extruding method. This product is mainly used for injection molding of electrical and electronic accessories, housing of electrical tools, fitting of machine, parts of automobile and so on. 2、Physical and Mechanical Properties No. Testing Project Testing Standard Testing Conditions Unit Test Data 1 Fiber content GB/T2577-2005 — wt% 20-23 2 Appearance — — — 白色 3 Specificgravity GB/T1033.1-2008 23℃ g/cm3 1.21 4 Melt Flow Rate GB/T3682-2000 235℃/2.16kg g/10min 13 5 Tensile Strength GB/T1040.2-2006 23℃ MPa 128 6 Flexural Strength GB/T9341-2008 23℃ MPa 182 7 Flexural Modulus GB/T9341-2008 23℃ MPa 5300 8 Tensile strain at break GB/T1040.2-2006 23℃ % 5.6 9 Izod notched impact strength GB/T1843-2008 23℃ KJ/m2 15 10 Deflection Temperature GB/T1634.2-2004 1.82MPa ℃ 196 11 Combustibility UL-94 1.6mm — HB Note：Data are only for reference. 3、Packaging WS SL-108Y3 product is packed in paper bag with 25 kg per bag. 4、Storage conditions In order to ensure the quality, WS SL-108Y3 product should be stored in a dry and room-temperature condition and not be attacked by sunshine, rain and humidity. WS SL-108Y33 增强尼龙6 产品技术说明 1、用途及适用范围 WS SL-108Y33增强尼龙6是以尼龙6、玻璃纤维等主要原料经共混挤出改性而制成的产品。本产品主要用于注塑