侧部导入超声处理对共晶Al-Si合金凝固特性的影响-中国有色金属学报.PDF

第 17 卷第 2 期 中国有色金属学报 2007 年 2 月 Vol.17 No.2 The Chinese Journal of Nonferrous Metals Feb. 2007 文章编号：1004-0609(2007)02-0308-05 侧部导入超声处理对共晶 Al-Si 合金凝固特性的影响 刘清梅，龚永勇，侯 旭，戚飞鹏，翟启杰 (上海大学 材料科学与工程学院，上海 200072) 摘 要：研究了功率超声处理对 ZL102 铝硅合金凝固特性的影响。研究发现：在凝固过程中进行超声处理能显著 细化共晶硅相，改善其形貌及分布；通过对比未处理、300 W 超声波及 500 W 超声波处理条件下铝硅合金不同部 位的力学性能及断口形貌，发现功率超声处理明显提高铝硅合金的力学性能，且随着处理功率的增大，合金的力 学性能随之提高。并分析了超声波在铝硅合金中传播时衰减的原因，通过数学方法得到衰减方程，并探讨了其衰 减规律。 关键词：共晶 Al-Si 合金；功率超声波；凝固组织；力学性能；衰减 中图分类号：TG 113 文献标识码：A Influence of side ultrasonic treatment on solidification characterization of Al-Si eutectic alloy LIU Qing-mei, GONG Yong-yong, HOU Xu, QI Fei-peng, ZHAI Qi-jie (School of Materials Science and Engineering, Shanghai University, Shanghai 200072, China) Abstract: The influence of side-introduced power ultrasonic treatment on the solidification characterization of ZL102 Al-Si alloy was discussed. The results show that the ultrasonic treatment on the alloy during solidification can refine the structure, develop the morphology and distribution of eutectic silicon. The mechanical properties and fractographs of the alloy by treatments without ultrasonic, 300 W ultrasonic and 500 W ultrasonic treatment were also compared. The results indicate that the power ultrasonic treatment can enhance the tensile strength obviously, and the mechanical properties increase with increasing ultrasonic power. The reason of ultrasonic attenuation was analyzed and the law of ultrasonic attenuation into the melt was discussed by the mathematical method. Key words: Al-Si eutectic alloy; power ultrasonic; solidification structure; mechanical property; att