土木工程医院毕业设计计算书.doc

本科毕业设计说明书 xxxxx第一人民医院建筑结构设计 ARCHITECTURAL AND STRUCTURAL DESIGN OF HUAINAN FIRST PEOPLE’S HOSPITAL 学院（部）： 专业班级： 学生姓名： 指导教师： 2014年 05 月 15 日 摘 要【1】 本次毕业设计的题目为淮南市第一人民医院门诊楼建筑结构设计。设计内容包括建筑设计和结构设计，结构形式采用钢筋混凝土框架结构，抗震等级为二级，抗震设防烈度7度；基础采用柱下独立基础，楼梯采用现浇混凝土梁式楼梯。主要进行了结构方案中横向一榀框架的在确定框架布局之后接着计算竖向荷载（恒载及活荷载）作用下的结构内力内力组合。此外还结构方案中楼梯的设计。Abstract The graduation design topic for the case of the first peoples hospital outpatient service building structure design. Design content including building design and structure design, structure using reinforced concrete frame structure, seismic grade as the secondary, seismic fortification intensity of 7 degrees; Foundation USES the independent foundation under column, using cast-in-place concrete beam stairs stairs. Mainly has carried on the structure scheme of transverse cross frame design. In determining the frame layout, the interlayer load representative value is calculated; With the bottom shear method is used to calculate horizontal seismic load, and then take the structure internal force under horizontal seismic action framework; The same process calculate the structural internal force under the action of wind load. Then calculate vertical load (dead load and live load) under the action of the structure of the internal force and then use the secondary bending moment distribution method to calculate vertical load (dead load and live load) under the action of internal force of structure. Find out the internal control combination, respectively was carried out on the beam, plate, column reinforcement calculation and construction drawings. In addition, completed the structural scheme of the design of stair. Keywords :Architectural design Structural design Frames The bottom shear method The secondary bending moment distribution method Internal force combination 目 录 第一部分 设计任务书 1 设计题目 设计题目：《淮南市第一人民医院门诊楼建筑结构设计本。底层层高4.2m，上面4层层高3.9m。综合几方面因素进行考虑，其结构方案采用整体现浇框架结构。 3.1 建筑功能要求 指导思想