AP1511A_B(IR-CUT控制IC).pdf

AP1511A / B IR Filter Switch Driver AP1511A / B IR Filter Switch Driver with one-shot output for IR-Cut Removable (ICR) HSIN-BAO CORPORATION. Agent: 2 F-1, No.118, Lane 235, Baociao Rd., Sindian D istrict, New Taipei City 23145, Taiwan (R.O.C) Taiwan, R.O.C. Tel: +886-2-8912-1515 Fax: +886-2-8912-1518 Version: 0.8 Jun. 7, 2011 This article is subject to change without notice. Preliminary 1 AP1511A / B IR Filter Switch Driver FEATURES and single-wire one-shot control modes as shown in Fig. 1 and Fig. 2. 1.8V input driving pulse Low saturation voltage PIN CONFIGURATION (0.73V@300mA,VDD=5V) Low standby current (10uA) 2.5V to 5.5V operating voltage range OUT2 VDD OUT1 6-lead SOT-26 package 6 5 4 Only one control input and Built-in AP1511A non-overlap circuit to avoid the MOSFET damage caused by the fast output voltage 1 2 3 transient ENB GND FBC APPLICATIONS OUT2 VDD OUT1 IR filter switch driver for IR-Cut Removable 6 5 4 (ICR) of IP CAM.