GSD瓶子实例.pptVIP

Copyright DASSAULT SYSTEMES 2002 Generative Shape Design Course Presentation Objectives of the course This course covers tools for surface design included in the Generative Shape Design Workbench that are not present in the Wireframe and Surface Design Workbench. At the end of the course, the student will be able to model complex fillets and analyze surface quality. Targeted audience Mechanical Designers Prerequisites Wireframe and Surface Design Table of Contents (1/2) Introduction to Generative Shape Design p.5 Creating Wireframe Geometry p.13 Creating an Extremum p.16 Creating a Polar Extremum p.20 Creating a Reflect Line Methodology p.23 Creating a Connect Curve p.26 Creating a Spine p.32 Creating a Parallel Curve onto a Support within GSD p.36 Extracting Multiple Edges from a Sketch p.40 Tools for Wireframe Geometry Creation p.42 Creating Surfaces p.58 Creating Swept Surfaces p.62 Creating an Adaptative Swept Surface p.86 Table of Contents (2/2) Performing Operations p.95 Joining Elements p.98 Healing Elements p.104 Smoothing Curves p.111 Extracting Elements p.117 Federating Elements p.120 Creating Fillets p.126 Inverting Orientation p.151 Creating Laws p.154 Using Analysis Tools p.159 Managing Features and Open Bodies p.189 Hybrid Design (Working with Hybrid Parts) p.208 Introduction to Generative Shape Design In this lesson you will see V5 Generative Shape Design user interface and basic functions Generative Shape Design Workbench Generative Shape Design Interface Generative Shape Design Terminology General Process To Sum Up 进入操作界面 GSD 概述 Generative Shape Design (1/2) Generative Shape Design (2/2) Terminology General Process To Sum Up ... Creating Wireframe Geometry In this lesson WFS Wireframe versus GSD Wireframe Review of WFS Wireframe Geometry Creating an Extremum Creating a Polar Extremum Creating a Reflect Line Methodology Creating a Connect C