PROE模座专家Emx.pptVIP

* Expert Moldbase Extension 3.0 PTC为模具制造业开拓新道路...... 模具专家 EMX 背景 虽然3D_CAD系统已被模具行业广泛用来设计模仁，但模架的设计仍然使用传统的2D形式，EMX可以带领我们进入完全的3D模具领域...... Expert Moldbase Extension 3.0 EMX 特点 I 快速选型及修改下列内容 模架及配件。 选取顶针规格，自动切出相应的孔位及沉孔。 screws, spring washers and dowel 系统预设BOM及零件图。 按预先定义的曲线轻易设计运水孔，安装水喉水堵。 Expert Moldbase Extension 3.0 完整的开模机构，包含螺丝，销钉及自动切槽 模拟开模过程 完整的滑块结构，包含螺丝，销钉及自动切槽。 平面图中的孔表功能。 完整的斜顶结构，包含螺丝，销钉及自动切槽 EMX 特点 II Expert Moldbase Extension 3.0 EMX 特点 III 自动化配置： 预设所有标准件的名称 螺栓，销钉自动安装。 预设各类零件的参数及参数值 各类简化表达 各类零件自动产生并归于相应图层 预设所有的螺栓，销钉及顶针的孔位间隙。 Expert Moldbase Extension 3.0 Included Suppliers Imperial (inch) D-M-E Progressive PCS National HASCO Metric (mm) HASCO Meusburger STRACK KLA EOC D-M-E Futaba Misumi Expert Moldbase Extension 3.0 典型的设计步骤 调入有关配件 选取模架类型及工件排位。 新开一个模具图 加顶针，运水 完善平面图 模拟开模过程 定义滑块，斜顶 调入库零件 Expert Moldbase Extension 3.0 新开一个模具 Type in projectname und -prefix. Load a predefined start-assembly with BOM-report and drawing. Expert Moldbase Extension 3.0 选取模架类型及工件排位 Create, delete and redefine components. Store and load complete assemblies. Manipulate bore patterns. Expert Moldbase Extension 3.0 调入螺栓 Placement on reference points, configure the counter-bores, let the system measure the length automatically Expert Moldbase Extension 3.0 调入销钉，支承柱 Choose the Type, select the bore options for both ends, redefine them after being assembled. Expert Moldbase Extension 3.0 加顶针 Choose the type, select options (rotate fixing, cut, length core pin), and assemble automatic Expert Moldbase Extension 3.0 加运水 Quick design of element and bore in one step Expert Moldbase Extension 3.0 定义滑块 Step by step definition of slider elements, check of sider unit in Pro/ENGINEER, Assembling of all cuts, dowel pins and screws Expert Moldbase Extension 3.0 定义斜顶，锁扣 Selection of latch lock type, control of opening steps, automated assembly included screws and pins Expert Moldbase Extension 3.0 调入库零件 UDF-styled definition of library-parts and assemblies, easy assembly of the components with