中英文通风空调施工方案.doc

通风空调安装方案 Heat ventilation air-conditioning installation solution 1．概况 Brief introduction 2．目的和范围 Purpose and scope: 本施工技术方案叙述了通风、空调系统设备、风管等施工步骤，以示保证施工质量和工程进度，指导工程施工顺利完成。This construction technical plan describes the installation process of ventilation, air-conditioning system equipment and air duct; guarantee the construction quality and schedule. 3．编制依据Planning basis 《通风与空调工程施工及验收规范》 GB50234—2002 Ventilation, air-conditioning installation and testing standard 《工业设备及管道绝热工程施工及验收规范》 GBJ126—89 Industry equipment and piping heat insulating project installation and testing standard 《通风与空调工程质量检验评定标准》GBJ304—98 Ventilation, air-conditioning installation quality testing standard 《组合式空调组》 GB/T14294—93 Combined air-handing unit GMP《药品生产质量管理规范》对洁净室的有关要求 Medical producing quality management standard 4．施工准备 Construction preparation 4．1 技术准备 Technical preparation 4.1.1 熟悉施工技术和相应的施工验收规范 Familiar with construction technique and installation inspection standard 4.1.2 编制施工方案并进行技术交底 Working out the installation plan and processing the technical intension 4.2 人员配备 Personnel appointing 施工人员应具备熟练的专业技能,确保本项目的通风空调安装质量达到技术规范的要求 The installation workers should have professional skill and insure the quality of ventilation air-conditioning installation to meet the standard requirements. 工机具配备 Tools preparation 必须满足现场施工的需要主要是:小型卷扳机、压边机 、电动剪刀、手动拉铆枪机必须的施工工具 The tools will answer site worker’s needs. Majority will be curling machine, flanging press，power shears，hand rivet, etc, installation tools. 材料配备 Material preparation 通风与空调制作安装的使用的材料、设备,必须有出厂合格证和质量鉴定文件,对制作风管机部件的镀锌钢板材料的表面应光滑、洁净、平整、无锈蚀、无锌层剥落,镀锌层厚度不小于0.02mm,制作角钢圈的材料应等型、均匀 不应有裂纹、气泡、凹凸等质量缺陷 Ventilation air-conditioning installation materials and equipment should be certified and quality inspection license. The surface of the zinc-plate steel sheet of air duct unit components should be smooth, clean, flat, dirust and without zinc layer peeling off. The thin ckness of zinc-plate layer should be more than 0.02mm. The material for L bar shou