焊条保温筒检定程序.doc

Procedure Number 程序编号 HY-MP-COP-002 Rev. No版本 Page页码 Document Status： 文件： PRE/准备 CFC/执行 Reference procedure No./Rev./参考程序编号/版本： N/A不适用 Document Title文件名称： Procedure for Calibration of Electrode Portable Oven 焊条保温桶检定程序 Document Type/文件类型 ：Procedure管理程序 Name Title 姓名及职务 Signature/Date 签名及日期 Approved by 批准 Prepared by 编制 职务： Title： Reviewed by 审核 Signature/Date： 签名及日期 QA Reviewer QA审核 Translator 翻译 Translation reviewer译审 Copyright Declaration:版权声明 ： This document is the property of the SNPEMC. It must not be used, reproduced, transmitted or disclosed without the prior written permission of SNPEMC。本程序未经山东核电设备制造有限公司书面批准不得外用、复制和泄露 Historical Records of Modification 修改历史记录 发布日期Issue date 修改范围及依据Scope and Basis of the Modification 1 Table of Contents 目 录 1. Purpose目的 3 2. Scope范围 3 3. Reference Documents参考文件 3 4. Responsibilities职责 3 4.1 Engineering Department工程部 3 4.2 Material Section物资组 3 4.3 QC Section QC部 3 5. Calibration steps标定步骤 4 5.1 Check of prerequisites/检查先决条件 4 5.2 Temperature measuring method/温度测量方法 4 5.3 Disposal of results/结果处理 4 6. Regular Inspection of Portable Oven During Construction焊条保温桶在使用过程中的检查 7. Applicable forms适用表格 5 Purpose目的 This procedure defines the calibration method and management requirements for electrode portable oven to CV assembly and erection at HaiYang site. 本程序叙述了焊条保温筒的检定方法和使用管理要求。 Scope范围 This procedure is applicable for the calibration, using and managing of electrode portable oven of HaiYang CV Project of SNPEMC. 本程序适用于SNPEMC海阳CV项目焊接生产过程中焊条保温筒的检定、使用和管理工作。 Reference Documents参考文件 Quality Assurance Manual for Haiyang Project HY-QAM 海阳项目质量保证手册 HY-QAM R Engineering Department工程部 4.1.1 Shall prepare electrode portable oven requirements planning according to production demands; 根据生产需要，编制焊条保温筒需求计划； 4.1.2 Use electrode portable oven correctly. 正确使用焊条保温筒。 Material Section物资组 Be responsible for procure electrode portable oven and build up calibration recor