6.1.3用JBuilder环境调试一步一步学Repast.ppt

Building the CarryDrop Simulation in JBuilderX By Deddy Koesrindartoto 08/16/2004 Introduction Creating a Demo Project Creating a project Demo…continued: Setting up required libraries: Setting up required libraries … Continued: Adding a Java class to the Demo project: Adding a Java class to the Demo project... continued: Copying Murphy’s source code for CarryDropModel.java from his website: Copying Murphy’s source code for CarryDropModel.java…continued: Adding other classes to the Demo project…continued: * This tutorial will explain, step by step, how to create a new project using existing RePast/Java code for a RePast Tutorial by John Murphy. To be consistent with Murphy’s Tutorial, the project name will be Demo.jpx, and it will contain three Java class : CarryDropModel.java; CarryDropSpace.java; CarryDropAgent.java. To follow this tutorial you will need: JBuilder X installed and running RePast library installed Access to the source code of John Murphy’s RePast Tutorial at : /~jtmurphy/H2R/HowTo01.htm Start JBuilder X Go to File - New Project In the Project Wizard dialog box (Fig 2.A) fill in the project name. Use Demo as project name. In JBuilder, this project name will also be used as the package name. Leave the default settings for the rest of the fields. Fig 1 Fig 2.A Fig 2.B In Fig 2.A click the Next button (1) to configure the library/libraries that will be used in Demo project. Dialog box (Fig 2.B) will appear. Press the Required Libraries (2), and press Add button to proceed (3). Leave the default settings for the rest of the fields. (1) (2) (3) Fig 3.A Fig 3.B Navigate through the list of libraries shown in Fig 3.A. Select RePast-2.2 library (1) and press the OK button (2). The new dialog box (Fig. 3.B) will acknowledge that the RePast-2.2 library has been added (3) to the Demo project. Leave the default settings for the rest of the fields, and click the Finish button(4). (1) (2) (3) (4) Fig 4 At this point, th