挂牌上锁管理制度.pptx

上锁/挂牌 LOCKOUT/TAGOUT;Topics: What is Lockout/Tagout (LOTO) 什么是上锁/挂牌 Why LOTO is needed 为什么我们需要上锁/挂牌 Who need to understand LOTO 谁需要理解上锁/挂牌 How to apply and remove LOTO 如何去实施和解除上锁/挂牌 LOTO products presenting 上锁/挂牌产品介绍;Lockout/Tagout. The placement of a lockout device and a tagout device on an energy isolating device, in accordance with an established procedure, ensuring and indicating that the energy isolating device and the equipment being controlled cannot be operated until the lockout and tagout devices are removed.;Purpose Of Lockout/Tag out上锁/挂牌的目的: – Control of hazardous energy控制危险能量 – Reduce the potential for employee injury during the servicing and/or maintenance of equipment resulting from the unexpected start-up or release of hazardous energy减少当维修和保养机械设备时 由于意外的启动或释放危险能量而引起潜在的员工 伤害;All accidents are unexpected, un-desirable, of cause “un-planned” events. 工业伤害事故都是“计划”以外的，是不期望发生的事件。几乎所有的事故都是由人的不安全行为，在不安全的状态、环境下发生，从而导致的人身伤害、死亡，或者财产的损失。 ;6 hazardous energy sources 工作场所中6个主要的危害能源;潜在原因 Unidentified causes ;WHO else other than employer, will use/understand LOTO;正确实施上锁/挂牌可以极大地避免意外伤害的发生！ Implementing LOTO can substantially protect people from accidences！;Equipment-Specific LOTO Procedures特定设备的上锁挂牌程序;LOTO Procedure Form 上锁挂牌程序表格;Step 1 - Prepare for Equipment Shutdown 步骤1-准备关闭设备。识别能源类型（电、机械…）和它潜在的危险。放好隔离装置并准备关闭能源。 Step 2 – Communicate with affected people 步骤2 – 通知可能因设备隔离受影响的人员。 Step 3 - Perform Equipment Shutdown 步骤3-履行设备的关闭。 Step 4 – Isolate Equipment 步骤4 – 将设备与能源隔离 Step 5 - Apply LOTO Devices 步骤5-进行上锁挂牌，确保无人可以打开开关或阀。以警告标签防止意外操作。 Step 6 - Release Stored Energy and Check Isolation of Equipment 步骤6-释放储存的能量并检查设备的隔离。 Step 7 – Check the Equipment being isolated 步骤7-检查设备已经被正确隔离 ;Step 1 – Take away the repair tools, and replace the guarding 步骤1-检查所有维修工具已经拿开，设备保护装置已到位。 Step 2 – Check for employees 步骤2 – 清点人员。 Step 3 – Remove LOTO 步骤3-解除上锁/挂牌。 Step 4 – Communicate with affected employees 步骤4 – 通知受影响的员工上锁/挂牌已经移除。 Step 5 – Res