【2017年整理】MP3外观检验标准.doc

Contents 目录 1.0 Content 目录 1 2.0 Purpose 目的 2 3.0 Scope 范围 2 4.0 Description 描述 2 4.1 Tools and Equipment 工具和设备 2 4.2 Instruction Detail 检验方法说明 2 4.3 Surface Classification 表面分类 4 4.4 Inspection Detail (Raw Plastic ) 检验说明(未加工的塑胶件) 5 4.4.1 General Appearance 总体外观 5 4.4.2 Criteria for Blister 疱块的判定标准 5 4.4.3 Criteria for Bubble 气泡的判定标准 5 4.4.4 Criteria for Colour 颜色的判定标准 5 4.4.5 Criteria for Crack / Crack line 裂缝/纹的判定标准 5 4.4.6 Criteria for Deform 变形的判定标准 5 4.4.7 Criteria for Dots 杂点的判定标准 5 4.4.8 Criteria for Flashes 毛边的判定标准 7 4.4.9 Criteria for Flow Mark 流痕的判定标准 7 4.4.10 Criteria for Gating Mark 进浇痕迹的判定标准 8 4.4.11 Criteria for Gating Material 浇口残料的判定标准 8 4.4.12 Criteria for Glossy Material 材料发光的判定标准 8 4.4.13 Criteria for Insert Line 拼接线的判定标准 8 4.4.14 Criteria for Scratches 刮(划)伤的判定标准 8 4.4.15 Criteria for Short Moulding 注模不足的判定标准 9 4.4.16 Criteria for Silver Streak 银纹的判定标准 9 4.4.17 Criteria for Sink Mark 缩水痕的判定标准 9 4.4.18 Criteria for Stress / Pin Mark 压力/顶针痕的判定标准 10 4.4.19 Criteria for Warpage 翘曲的判定标准 10 4.4.20 Criteria for Weld Line 熔接线的判定标准 10 4.4.21 Criteria for Clear Transparent Parts 透明件的判定标准 10 4.4.22 Criteria for Dented Mark 凹痕的判定标准 11 4.5 Inspection Detail for Plastic with Secondary Process (eg :spray painting, sputtering, printing, ultrasonic welding, heat staking, Plating and EMI shielding) 二次加工(表面处理)的塑胶件检验说明(如:喷漆、喷镀、印刷、超声焊、热能焊、电镀和电磁屏蔽) 12 4.5.1 Criteria for Spray Painting / Sputtering / Plating 喷漆/喷镀/电镀的判定标准 12 4.5.2 Criteria for Printing 印刷的判定标准 13 4.5.3 Criteria for Dust Particles 灰尘杂质的判定标准 13 4.5.4 Criteria for Ultrasonic Welding 超声焊的判定标准 13 4.5.5 Criteria for Heat Staking 热能焊的判定标准 14 4.6 Inspection Detail for General Assemblies总体装配的检验说明 15 4.6.1 Criteria for Mismatch 装配不良（断差）的判定标准 15 4.6.2 Criteria for Parting Gap 装配间隙的判定标准 15 5.0 Reference 参考文件 16 6.0 Remarks 备注 16 7.0 Revision History版本记录 17 8.0 Approval批准 17