【2017年整理】最好用的激光对中讲解1.ppt

Section 3;3.1 激光技术;? 激光技术, Overview;? 什麽是光 ?;? The Laser;? 激光分级;? The PSD;3.2 Fixturlaser 轴对中测量调整系统;显示器;安全;保养与维护;安装夹具和探测器;将 “V” 型支架安装在被测轴上. Use the bracket hook to “catch” the chain. The other end of the chain goes under the shaft and will fit into the bracket cradle to secure the bracket to the shaft.;安装夹具和探测器;连接电缆;输入尺寸;输入尺寸;输入尺寸;输入尺寸;输入尺寸; 轻触 进入这屏幕: ;程序的设定;程序的设定;程序的设定;程序的设定;瞄准激光;测量不对中以前;: ;打开探测器盖 旋转TD’s 到 9:00 轻触 记录读数;旋转TD’s 到 3:00 轻触 记录读数;旋转TD’s 到 12:00 轻触 记录读数;评估垂直不对中;评估水平不对中;调整过程;旋转TD’s 到 12:00 . 轻触 Positive values at the feet mean that the movable machine is high, therefore you will remove shims. Negative values mean that the movable machine is love, so you should add shims.;旋转TD’s 到 12:00 . 轻触 Positive values at the feet mean that the movable machine is high, therefore you will remove shims. Negative values mean that the movable machine is love, so you should add shims.;实施垂直调整 ;旋转TD’s 到 3:00 . 轻触 Negative values mean that the feet need to move away from you because the machine is towards you. Positive values mean that the feet need to come towards you because the machine is away from you.;移动设备直至你看见的地脚值接近零. 首先调整地脚大的值.;3.3 Activity: 时钟法;3.4 Activity: 三点法;3.5 基础和螺栓受限的情况;? 螺栓受限的情况;螺栓受限的选择;? 基础受限情况;基础受限的选择;? 固定地脚功能;固定地脚;3.6 实施:固定地脚