doskey(国外英文资料).doc

doskey(国外英文资料) Load the Doskey program to memory. The Doskey program callback ms-d0s command allows you to edit the command line to create and run macros. The Doskey is a memory-resident program, and once installed, the Doskey occupies approximately 3k bytes of resident memory. Grammar: The DOSKEY [/ BUFSIZE = size] [/ MACROS] [/ HISTORY] [/ INSERT | / OVERSTRIKE] [/] To start the Doskey program and use the default Settings, use the following syntax: DOSKEY Parameters: Macroname = [text] Create a macro (Doskey macro) that executes one or more ms-dos commands. The Macroname specifies the name that is intended to be assigned to the macro, and the Text specifies the command to be logged. Switch: / REINSTALL Install a new copy of the Doskey program, even if its already installed. In the latter case, the/REINSTALL option also clears the buffer. / BUFSIZE = the size Specify the size of the buffer that Doskey is used to store the command and the Doskey macro, with a default size of 512 bytes. The minimum buffer is 256 bytes. / MACROS Show the list of all the Doskey macros. In the/MACROS option, you can use the repeat directive (), which directs the list to the file. / MACROS can be abbreviated to/M. / the HISTORY Displays all commands stored in memory. In/HISTORY, redirects can be used to redirect the list to the file. / HISORY is abbreviated/H. / INSERT | / OVERSTRIKE Specifies whether the body of the new type is replaced by the original body. If you use the/INSERT option, the text that is typed on a line is inserted into the original body (just like pressing the INSERT key). If/OVERSTRIKE, the new text is replaced with the old body. The default is/OVERSTRIKE. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- DOSKEY ─ annotations The callback command To callback commands, you can use a