FANUC 0-TD系统说明书(国外英文资料).doc

FANUC 0-TD系统说明书(国外英文资料) NC programming system FANUC 0-TD G command The code group and its meaning modal code and general code form code function is executed after it will continue to maintain the general code only on receipt of the command role. The definition of mobile code is usually modal code, like linear and circular and cyclic code. On the other hand, as the origin of the return code is called general code. Each code belonging to their respective code group. In the modal code, the code will be replaced with the group code loading. Explain the G code group G00 01 position (fast moving) G01 linear cutting G02 clockwise arc (CW, clockwise) G03 counter clockwise arc (CCW, counterclockwise) G04 00 suspension (Dwell) G09 stopped at the exact position G20 06 inch input G21 metric input G22 04 internal travel limit effectively G23 internal travel limit invalid Check the G27 00 reference point return G28 reference point return G29 returns from the reference point G30 back to the second reference point G32 01 thread cutting G40 07 cancel tip radius offset G41 tip radius offset (left) G42 tip radius offset (right side) G50 00 modified workpiece coordinate spindle RPM set; G52 set up the local coordinate system The machine coordinate system G53 G70 00 finish cycle G71 diameter rough cutting cycle Step G72 rough cutting cycle G73 plastic recycling Z drilling to step into the G74 G75 X to cut G76 thread cutting cycle G80 10 to cancel the fixed cycle G83 drilling cycle G84 tapping cycle G85 positive circulating boring G87 side drilling cycle G88 side tapping cycle G89 side boring cycle G90 01 (outside diameter) cutting cycle G92 thread cutting cycle G94 (step) cutting cycle G96 12 constant speed control G97 constant line speed control to cancel G98 05 the feeding rate per minute G99 feed rate Code explanation G00 positioning 1. X_ format G00 Z_ this command the position of the tool to move from the current position to the specified command (in absolute coordinate mode), or m