SU小技巧(国外英文资料).doc

SU小技巧(国外英文资料) Some of the SU tips that are reproduced in the title hope to help you When selecting, double-click on a single face to select the surface and the line that makes up this surface Double click on one side of the object, and you can select the entire surface and line of the object When using the roaming command and camera command, you can enter the height of your view in the input box in the lower right corner When using the dynamic zoom command, you can enter the number + deg (example: 60deg) to adjust the cameras view When using the dynamic zoom command, you can enter the number + mm (example: 35mm) to adjust the focal length of the camera To make a group or component of an object, you can select the mirror image in the right side of the right-click menu Select the object, scale the command, select the zoom direction and enter -1, which can mirror the object Use the push-pull command to double the last time the next time you use the push pull command When selecting an object, hold down CTRL to increase your selection, hold down shift, and hold down control and shift to reduce selection Shift + mouse button is pan When locking in one direction (such as parallel, pole, etc.) hold shift to keep the lock Click the object under 12, selection state is line selection or double-click is line with noodles And after three strikes can choose body object selection Hold down CTRL to copy command can be directly copied using mobile objects and if the object group already made copy out the object remains in the same group Use a rubber wipe to remove the line and not remove the surface so if you want to remove a cluttered line and use the eraser to make it easier to use the DEL command The scroll wheel + left key is pan well, notice the roller, the left key. 14, the replication mobile (press CTRL copy) after input the value of x, such as the input 5 is between the two objects appear four objects, such as input 4 between the two objects appear three objects, arrays, too