乐清市多泰矿用设备有限公司(国外英文资料).doc

乐清市多泰矿用设备有限公司(国外英文资料) Yueqing Duotai mining equipment Co. Ltd. Punch operation rules Version / modify number: 0/0. Revision date: First Edition WI-02.01 Page: 1/1 1. operating procedures: 1.1 drive clean bench and floor. 1.2 check the power supply electric circuit is intact. 1.3 check whether the mold is installed correctly. Stroke adjustment is correct. 1.4 power to check for any abnormal sound, check whether the switch is flexible and effective. 2. stop notice: 2.1 for leave or shut-down of the power should be cut off. 2.2 after the shutdown, routine maintenance of equipment according to the neat, clean, lubrication, safety requirements. 2.3 clean working area. 3. safety instructions: 3.1 correction molds must stop to move by hand. 3.2 are not allowed to use substandard wrench, plate, rose and other tools. 3.3 in the process of operation, no hand put parts in die. 3.4 remove scrap must use special tools. 3.5 using the foot brake operation, hand and foot action to coordinate, continued and pickup, the feet should leave foot. 3.6 punch table not stacked parts, tools, gauges and other messy things. 3.7 work to concentrate, and others are not allowed to laugh, because it left the power must be cut off. Yueqing Duotai mining equipment Co. Ltd. Grinding machine operation Version / modify number: C/0. Revision date: 2004.10.10 WI-02.02 Page: 1/1 First, the operator must be familiar with the performance and the structure of the utility model, the application scope of the lathe and the types of professional and technical regulations, grasp the safety code. Two, grinding machine must be equipped with durable protective cover, prohibited the use of no hood, not prohibited grinder reliable ground use. Three, prohibited the use of crack inspection of grinding wheel, the grinding wheel can tap a mallet, clear sound can be used. Four, the operator should stand on the right or left on the wheel, try to. 1. wheel should be no eccentric rotation phenomenon; 2. wheel speed should no