玻璃最普通的厚度规格(国外英文资料).doc

玻璃最普通的厚度规格(国外英文资料) Standard Specification for the most common thickness of laminated glass 2007-5-11 source: Jialong international glass procurement network hit number: 1341 Laminated glass has a variety of thickness specifications, and these thicknesses are designed to resist various levels of tool or gun attacks. No formal information has yet been available to help answer this question. But laminated glass plants offer products that meet standards and process specifications. If you want to prevent certain dangers, youd better listen to the advice of glass and door - and - window experts. The thickness of laminated glass available in some cases is listed below: A) protect the body against damage caused by broken glass: the minimum thickness is 6.4mm, and the recommended thickness is 6.8mm; B) anti damage: minimum thickness is 7.5mm; C) minimum 7.5mm theft; D) resist bullets, from 30mm. Specification: thickness of ultra-thin glass 1.8mm 1.5mm 1.3mm 1.1mm 1.0mm 0.85mm 0.7mm 0.55mm size: Online cut size: the maximum plate length 4000 mm minimum plate length 600 mm maximum width 3210 mm minimum width 300 mm offline cut size: according to the needs of users can provide Jeco plasterboard 12 * 1200 * 2400 square meters 10.60 Knauf plasterboard 12 * 1200 * 3000 square meters 10.70 Aifuxi perforation plate 600 * 600 * 10.95 6mm Intsia (merbau board) 900mm * 122mm 100 square meters Large fupike linear composite plate 595 * 595 * 16 square meters 102 Guaranteed plate LD series 2440 x 1220 x 7 M2 103.45 Medium density Australian cypress fireproof board (calcium silicate) 1220 * 2440 * 8mm Zhang 105 Huili solid plate 6mm * 4mm * 2.05mm square meters 105 Aifuxi perforation plate 600 * 600 * 13.95 8mm The PC panel 3mm * 2.05 * 130 30m square meters The PC panel 3mm * 1.819 * 130 30m square meters The PC panel 3mm * 1.56 * 130 50m square meters The PC panel 3mm * 1.213 * 130 50m square meters Taishan eternit porcelain plate board 0.75 square meters 130 Aifuxi low shrinkage fiber c