自动化专业认识(国外英文资料).doc

自动化专业认识(国外英文资料) Knowledge of Automation Specialty Automation is a focus on a professional technology in the field of automatic control, it involves all fields of production and life, such as large factories are widely used in pipeline engineering, it is a significant contribution to automation. Automation includes respectively 5 basic theory and application of 1. directions: control theory and control engineering 2. detection technology and automation devices 3. pattern recognition and intelligent system of 4. navigation, guidance and control system engineering 5.. These 5 kinds of professional directions are applicable to the needs of all kinds of production, and also to the application and improvement in production and life. Now let me tell you about my understanding of automation in life. Automobile production process Automobile production includes casting, cold stamping, welding, metal cutting, heat treatment, assembly and other six processes, each process reflects the importance of automation. In the process of forging, molten metal is poured into the mold cavity and cooled to produce the product. Instead of pouring molten iron directly into the cavity, the process is accomplished through a series of automated processes through production robots. Also, a series of automatic controls are required before the model is generated. In the process of cold stamping. Cold stamping or sheet metal stamping is the process of cutting or forming metal sheets in the die under the pressure. In the process of cold stamping, the model must have two hard mold, and mold in the mold process to control the closure closure speed in the model leads to prevent substandard quality or low production efficiency in the manufacturing process of model. Welding. The third process is the welding process. Welding is a method of joining two pieces of metal together by heating them or heating them together and pressing them together. In the traditional welding process, only a worker carries on t