1 目的 Prpose.doc

1 目的 Purpose: 为确保量规仪器使用的精密度和准确度，保证量规仪器统一管理规范有效性实施。藉以确保检验、量和测实验时之制品品质，特制定本作业程序，以维系仪校系统正常运作。 In order to guarantee precision and accuracy that the gauge and instrument uses, guarantee to unify the validity implementation of the standard management with instrument, products quality while using to guarantee examining, quantity examining and experiment. specially make this operation procedure and keep testing the normal operation of the calibration system.. 2 范围 Scope: 本作业程序适用于中国大陆Power厂区（长安厂、广州厂、常州厂。“以下称本公司”）之检验、量测和实验用之量规仪器的测试及管制（治工具类不适用此程序）。 The operation procedure is suitable for the factory of Chinas Mainland Power (ChangAn, GZ, CZ. “Hereafter referred to as our company”) test, quantity are examined and experiment test and control with it gauge of instruments (manage tool types and is not applicable to this procedure). 3 权责 Authorization Responsibility: 3.1 使用部门与维护部门 User and safeguard the department: 3.1.1 量规仪器的日常状态点检及维护。 The daily state of the gauge and instrument is handed over item by item and maintained. 3.1.2 教育作业者正确地使用量规仪器。 The educational operator uses the gauge and instrument correctly. 3.1.3对所属量规仪器进行台帐管理与校验日期的管理，定期将量规仪器送校验室进行校验检查。 Carry on the management that manages and corrects date of an account as to the gauge and instrument, timing expire gauge instrument give to calibration. 3.2 校验室 Calibration Lab: 3.2.1 对本司新进量规仪器实施验收检查。 To entering the gauge and instrument and confirming the inspection in our company newly. 3.2.2 对本公司的全部量规仪器进行状态管理与实施周期性校验检查。 Carry on the state and manage and periodically correct the inspection as to all gauge instruments of our company. 3.2.3 计量标准器具及不可内部校验的量规仪器实施外部机关校验检查。 The master equipment and cant gauge instrument that inside calibration implement outside organization calibration. 3.2.4 计量标准器具GRR（MSA）的测量系统分析。 Measuring apparatus master equipments GRR(MSA)m