MSC.1-irc. 1353-Rev.1-货物系固手册编制指南.pdf

MSC.1/Circ.1353/Rev.1 Annex, page 3 CHAPTER 2 SECURING DEVICES AND ARRANGEMENTS 2.1 Specification for fixed cargo securing devices This sub-chapter should indicate and where necessary illustrate the number, locations, type and MSL of the fixed devices used to secure cargo and should as a minimum contain the following information: 2.1.1 a list and/or plan of the fixed cargo securing devices, which should be supplemented with appropriate documentation for each type of device as far as practicable. T he appropriate documentation should include information as applicable regarding: .1 name of manufacturer; .2 type designation of item with simple sketch for ease of identification ; .3 material(s); .4 identification marking; .5 strength test result or ultimate tensile strength test result; .6 result of non destructive testing; and .7 Maximum Securing Load (MSL); 2.1.2 fixed securing devices on bulkheads, web frames, stanchions, etc. and their types (e.g. pad eyes, eyebolts, etc.), where provided, including their MSL; 2.1.3 fixed securing devices on decks and their types (e.g. elephant feet fittings, container fittings, apertures, etc.) where provided, including their MSL; 2.1.4 fixed securing devices on deckheads, where provided, listing their types and MSL; and 2.1.5 for existing ships with non-standardized fixed securing devices, the information on MSL and location of securing points is deemed sufficient. 2.2 Specification for portable cargo securing devices This sub-chapter should describe the number of and the functional and design