商标印刷机在不干胶标签行业中的应用.doc

商标印刷机在不干胶标签行业中的应用 商标印刷机的定义： 商标印刷机主要应用在不干胶标签行业，所以又叫不干胶商标印刷机。不干胶商标印刷机主要是为了适应商品品牌标签粘贴方便的需要，在纸张的背面均匀涂布了一层不干胶层，粘附在一层容易剥离的涂蜡纸上，不干胶有卷筒型和单张型两种。常用不干胶商标机是经印刷后用刀线轧印、模切，剥去空白多余部分，在涂蜡纸上留下一定形状的印刷品。使用时只要将成品剥离下来直接粘贴到商品或包装物上，十分方便快捷。不干胶商标除了有铜版纸和其它纸质以外，还有铝箔、金卡、银卡、彩色涤纶薄膜为承印物的不干胶印品。 SBF-240电脑型商标印刷机 参数如下: 最大进纸宽度: 240MM 最大模切面积: 240MM*220MM 模切速度: 0-10000次/H 机械尺寸: 2150*1070*1690MM 机械重量: 2500KGS 总功率: 3.7KW SBF-240 computering trademark printing model Reference as below : Maximum paper inputting width: 240MM Maximum cutting area : 240MM*220MM Cutting speed: 0-10000times/H Machine dimension: 2150*1070*1690MM Machine weight: 2500KGS Total power rate: 3.7KW 电源电压: 220V 特点:1、操作简便、高速灵活、套位精确、自动送纸、印刷、腹膜、模切、切张至成品连贯作业。2、可任意设定裁纸数量，前后角度可进行微调， 确保裁纸纸张位置更准确，数字控制，操作简单，数量精确。3、上光压轮可整组抽出，省时操作方便，易清洗，速度快、稳定性高。4、自动给纸配合机械印刷，无纸时机械自动停止。5、模切座可同步调整左右、上下、横线角度等，试机快速、安全性高，确保机台安全。6、各装置开关简易辨别、操作方便。7、采用日本原装伺服拉纸系统，套位精确，缩短套印时间，可多次重复印刷（二次），正双面印刷，操作更为方便快捷。8、装置机械给油系统，使机械在运转过程中正常无磨损，从而延长机械寿命。Fast Flexible, accurate positioned, inputting papers automatically,, printing, peritonealizing, cutting to finished products on process. set freely the paper-cutting quantity , adjust slightly the degree back or front, make sure to cut papers position more accurate, number controlled, easy operation, quantity precise 3. The wheels can be pulled out by whole group, time-saving for operation, easily clean, fast speed, high stability 4. The paper can be put into machine automatically when printing, otherwise it stops without paper 5. Cutting models could adjust left and right, up and down, horizontal angel at the same time, trial testing with fast speed, high security, is sure of machine safety. 5. The switches of equipment easy to recognize and operate 7 Use Japan original pulling-paper system, accurate positioned, reduce time in printing, which can be printed many times (twice), front back print, that will be conducted much more conveniently 8. The device machine provides fuel oil wh