UL817相测试.ppt

CORD SETS AND POWER SUPPLY CORDS-UL 817 測試項目與對應條文 公插測試(一般依UL 817標準測試,對應章節為)- Clause 81- Conductor Secureness Test 半成品電線與銅片間牢固性測試 Clause 82- Security of Blades Test 成品插頭與銅片牢固性測試 Clause 83- Security of Insulation Test 成品電線絕緣皮與插頭附著力及牢固性測試 Clause 84- Strain Relief Test 成品拉力測試 Clause 87- Temperature Test 溫昇測試 Clause 88- Dielectric Voltage-Withstand Tests 耐電壓測試 公插測試(一般依UL 817標準測試,對應章節為)- Clause 89- Insulation Resistance Test 絕緣阻抗測試 Clause 90.2- PVC Compounds Clause 94- Attachment Plug Grip Test Clause 95- Blade Pull Test at Elevated Temperature 老化後銅片拉力測試 Clause 96- Flexing Test 彎曲測試 Clause 99- Abrupt Pull Test 突拉測試 Clause 100- Jacket Retention Test 電線外被保持力測試 公插若需作outdoor use測試(依UL 817標準測試,對應章節為)- Clause 60.2- Adhesion Test 黏著力測試 母插測試(一般依UL 817標準測試,對應章節為)- Clause 81- Conductor Secureness Test 半成品電線與銅片間牢固性測試 Clause 83- Security of Insulation Test 成品電線絕緣皮與插頭附著力及牢固性測試 Clause 84- Strain Relief Test 成品拉力測試 Clause 88- Dielectric Voltage-Withstand Tests 耐電壓測試 Clause 89- Insulation Resistance Test 絕緣阻抗測試 Clause 90- Accelerated Aging Tests 加速老化測試 Clause 90.2- PVC Compounds Clause 93- Improper Insertion Test 不當插入測試 Clause 96- Flexing Test 彎曲測試 母插測試(一般依UL 498標準測試,對應章節為)- Clause 87- Mechanical Drop Test 機械落下測試 Clause 88- Mold Stress Relief Test 模壓應力消除測試 Clause 89- general test(Sections 60-68,90-101) Clause 90- retention of plugs tests 插頭保持力測試 Clause 91- overload test 電流過載測試 母插測試若需作outdoor use測試(依UL 817標準測試,對應章節為)- Clause 60.2- Adhesion Test 黏著力測試 Clause 97- Low-temperature insertion test 低溫插入測試 Clause 98- Random drop test 自由落體測試 針對PLUG配SRDT線之測試項目 BASIC TESTS FOR ATTACHMENT PLUG CAP, INCLUDING Clause 81- Conductor Secureness Test 半成品電線與銅片間牢固性測試 Clause 82- Security of Blades Test 成品插頭與銅片牢固性測試 Clause 84- Strain Relief Test 成品拉力測試 Clause 87- Temperature Test 溫昇測試 Clause 88- Dielectric Voltage-Withstand Tests 耐電壓測試 Clause 89- Insulation Resistance Test 絕緣阻抗測試 Clause 90- Accelerated Aging Tests 加速老化測試 Clause 95- Blade Pull Test at Elevated Temperatur