意大利SETTIMA SETTIMA泵 SETTIMA螺杆泵.doc

意大利SETTIMA SETTIMA泵 SETTIMA螺杆泵 螺杆泵低中压无噪声的应用 SMT pumps are three screw pumps for industrial use at low and medium pressure (80 bar). SMT泵，三螺杆泵，工业用途，低中压（80条）。 SMT pumps represent a reliable and low noise component for many industrial applications where long life and low cost are required. SMT泵代表了可靠，低噪音，寿命长，成本低，许多工业应用中的组件。 SMT pump is a priming pump assembled into a body pump. SMT泵是一种组装成一体的泵吸式泵。 The three screws rotate inside the body pump and the design of the screws avoids any axial load.身体内部泵旋转的三个螺钉和螺丝的设计避免了任何轴向载荷。 The functional pressure develops some tolerance between the balancing piston of the main screw and the surrounding body.功能压力的发展主螺杆和周围物体之间的平衡活塞的一些宽容。 This creates a balancing hydrodynamic force of the screws and, at the same time, lubricates and cools down the sealing parts.这将创建一个螺钉的平衡水动力，并在同一时间，润滑和冷却的密封部位。 The torque needed to move the lateral screws is transmitted hydraulically by the pumped fluid.移动的横向螺丝所需的扭矩由泵送流体的液压被传递。 This means that the screws rotate with no possibility of wearing.这意味着，没有穿可能性旋转螺丝。 The high quality of screw manufacturing ensures a very low level of acoustic emissions and pulsation.螺丝制造高品质的确保声发射和脉动的非常低的水平。 The geometric design of the three screws creates sealing chambers.创建的三个螺丝密封腔的几何设计。 During the rotation of the screws, the main one creates a sort of cavity that holds the fluid and drives it with an axial direction from the inlet to the outlet port.的螺钉的旋转过程中，主要的一个创建一种腔保持流体并驱动它的轴向方向上从入口到出口端口。 SMT pumps may have internal or external relief security valves. SMT泵可能有内部或外部救援的安全阀门。 Applications: 应用范围： OIL GAS OIL＆GAS OIL FUEL - Oil Lubrication Transfer services (API676) 石油燃料-油润滑接送服务（API676） POWER 电源  Tandem solution for burner boosting systems串联燃烧器提高系统的解决方案 Burners injections燃烧器注射 Turbine compressors lubrication透平压缩机的润滑 Seal oil applications and services密封油的应用程序和服务 Jacking oil systems,顶轴油系统， Filtration, lube services过滤，润滑油服务 Oil transfer输油 WIND ENERGY WIND ENERGY  High viscosity lubrication and filtration高粘度的润滑和过滤 Gear box lube oil