热胶道图集.doc

HPS III - 230V HPSIII – 230V The externally heated EWIKON HPS III hotrunner system 外热式的EWIKON HPS III热流道系统是用于加工几乎所有的热 is designed for the processing of almost all thermoplastics 塑性塑料(包括增强型塑料)的热流道系统，是多样化的热嘴类型 including reinforced materials. A variety of nozzle types 和进胶方式以及出众的分流板技术的完美结合。 and gating options can be combined with a superior 因此，这套系统在各种领域得到最广泛的应用。 manifold technology. Therefore, the system is suitable 除了高性能的HPS III-S型和HPS III-K型热嘴, 针对于小间距多 for most areas of application. 腔的产品应用需要,我们还推出了HPS III-VT型热嘴。 Beside the HPS III-S and HPS III-K high performance 此外,HPSIII-S的热嘴也可以作为单点的HPSIII-SE型热流道系 hot tips, the slimlined HPS III-VT nozzles offer additional 统单独使用。 options for multi-cavity applications with close cavity 此套系统有两种规格的分流板可供选择。当需要非常完美的流 spacing. HPS III-S nozzles are available as single tip 动平衡性时，HPS-T型分流板是正确的选择。 version HPS III-SE as well. 如需考虑经济实用性时，最好选择HPSIII-E型分流板。 On the manifold side two versions are available. Where 两种规格的热流板都有不同的流道孔径系列。因此，可以很容易 absolutely perfect flow characteristics are required, the 的根据产品重量,按照流变学的要求优化流道孔的尺寸。 HPS III T is the system of choice. If, however, the accent is put more on economic performance, the HPS III E manifold system is better suited. Both versions are available with different flow channel diameters. Thus, the manifold size can easily be adapted to different shot weights and the flow bores can be optimized with respect to rheological requirements. HPS III-00p.qxd a00195.pdf - 01/04 The HPS III T manifold system has been designed HPSIII T型分流板系统设计用于加工热稳定性要求苛 for the processing of thermally demanding materials. 刻的塑胶材料。所有的HPS III T型分流板的均由流线型 All HPS III T manifolds feature streamlined direction 的镶件组成，即使在流道拐角处或融胶分配处均无流动 elements. Even in critical areas of the flow channel - 死角。因此，此分流板完美的系统平衡得以保证融胶流动长 changes of flow direction or distri