Ultrafunk混响器参数说明(国外英文资料).doc

Ultrafunk混响器参数说明(国外英文资料) [ZT]Ultrafunk reverb parameter description 1. input level (input): used to control the effect of the whole volume, to ensure that no overload. 2. low frequency Lou CutHigh Cut: usually in processing, in order to clear and warm reverb sound, will be low frequency and high frequency to remove part of it. High and low frequencies can only be preserved when there are science fiction environments such as cosmic sound. 3. early reflection time (Predelay): the time distance between the direct sound and the forward reflected sound. There are several characteristics: the bigger the space, the longer the Predelay; the shorter the shorter, the wider the space; the longer the Predelay; the shorter the other. 4. space breadth (Room size): that is, the size of the reverberation space, the value is small, the sound in the sound field position behind, big value, the sound of the front. 5. diffusion degree (diffusion): traditionally known as Early reflections diffusion (the scattering of early reflections). We know that early reflections are a series of more pronounced reflections. The proximity of these reflections is diffusion. The wall is not smooth (such as a carpet of sound scattering), the greater degree of reflection, more, each other more closely, reverberation is a voice repeatedly, very gentle; the more smooth walls (such as glass), the sound scattering degree is smaller, less reflection, mutual between the more open, sounds closer to the echo reverberation sound, the sound is very clear. 6. Bass Multiplier: Generally speaking, the high frequency of reverberation must be shorter than the low frequency. The bigger the space, the more objects in the space, the less smooth the surface of the object and the wall, the shorter the duration of the high-frequency, and the greater the gap between the low-frequency. Only in the small space and the surface of the space is smooth, the high-frequency time is close to the low frequency. 7. frequency divider (Cr