冷库库体的安装(国外英文资料).doc

冷库库体的安装(国外英文资料) Shanghai cold division Refrigeratory library body installation 1. cold storage layout Shanghai refrigeration cold storage layout is divided into cold division that indoor and outdoor type, two kinds of layout of each has its special features. (1) the layout of indoor cold storage should pay attention to the following problems 1) there should be a proper installation clearance, installation operation in place, cold outside wallboard from the strong distance should be not less than 400mm; without the operation, the cold wall lateral wall distance should be 50-100mm. The floor of the ground heat insulation board of the cold storage should be 100-200mm higher than the indoor ground; the outer side of the heat insulation board of the top surface of the cold storage should have a installation interval of not less than 400mm, and the side wall of the cold storage door should have an operating distance of not less than 1200mm. 2) there should be good ventilation and lighting conditions. 3) installation sites and nearby sites should be clean, in line with food hygiene requirements, and keep away from flammable. Explosive materials, to avoid odor gas into the library. 4) the arrangement of cold storage door should facilitate the import and export of refrigerated goods. 5) the warehouse shall be laid on the ground, and the goods shall be piled up on the mat board. 6) the layout of refrigerating equipment shall take into account the influence of vibration and noise on the surrounding areas, and shall also consider the operation and maintenance of the equipment and the length of the pipe taking. 7) the layout of cold storage should be considered comprehensively according to the width, height, modulus and the actual situation of the installation site. The cold storage plant has its standard combination of cold storage tables for design and user selection, (2) is the appearance of cold storage layout, the layout, in addition to food hygiene requirements, safety re