木窗帘盒(国外英文资料).doc

木窗帘盒(国外英文资料) I. material requirements One Wood and products: general use of red and white pine and hardwood drying material, moisture content is less than 12%, and shall not have cracks, distortion and other phenomena; usually made of wood processing factory production of semi-finished or finished products, the installation of the construction site. 2., hardware accessories: according to the design of metal fittings, curtains, rails and so on. 3. metal curtain rod: general design, specify the drawing number, specifications and construction forms. Two 、 main machines and tools 1. electric drill, small electric saw. 2. large woodworking plane, small plane, plane, small saws, screwdrivers, chisel, hacksaw punch, etc.. Three, operating conditions There is a ceiling with dark curtain box room, ceiling construction should be installed with the curtain box at the same time. Four, operation process 1. process Localization and inspection and treatment, marking, embedded products, curtain box installation verification (bar) Two Positioning and scribing: installation of curtain box, curtain rod, should be the center of the design requirements of positioning, play the leveling line, looking for good structural relationship. Three The embedded parts inspection and handling: check for fixed curtain box line (bar) whether the location, specifications, pre buried fastener buried methods can meet the fixed requirements for elevation, flatness, center position, wall distance error measures should be taken for treatment. Four Check the processed products: check the incoming products, and check the varieties, specifications and assembly structure before installation to meet the requirements of design and installation. 5. curtain box (rod) installation: 1) Install the curtain box: first determine the elevation by the flat line, draw the center line of the curtain box, and install the curtain box center line to the middle of the window, the box wall should be affixed tightly and fixed me