sa系列二氧化硅喷墨打印介质吸附材料 - tradekoreacom.doc

sa系列二氧化硅喷墨打印介质吸附材料 - tradekoreacom.doc

  1. 1、本文档共10页,可阅读全部内容。
  2. 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
sa系列二氧化硅喷墨打印介质吸附材料 - tradekoreacom

SA系列二氧化硅消光剂 f China’s GDP, the coating market increases annually by 8~10% on average, which thus drives the development of the coating material market, especially the rapid increase of the delusterant powder market. However, the research on SA Series Silicon Dioxide Delusterant is relatively late, and the research and production of ultra-fine aerogel began in 1984; therefore most kinds of domestic delusterant powder can only meet the product requirements of medium and low-grade coatings. The field of high grade products is mostly monopolized by foreign manufacturers. In recent years, although China has done a lot of research work in this field, most work is still at the trial stage. Moreover, domestic products lag behind the foreign products in terms of transparency, dispersion, stability of storage and efficiency. 我公司在2007年底通过引进国外先进的生产工艺和设备,并与自我创新相结合,采用特殊的合成工艺及有机处理工艺,利用气凝胶大孔容、高比表面与各类树脂折光指数相同的特点,研制开发出了新型SA系列高效消光剂,它的初始粒径从10到15nm不等,聚集体平均粒径为2um,3um,4um,5um(激光衍射法),孔隙率达到1.8-2.0ml/g。产品质量达到国际先进水平。 At the end of 2007, our company introduced foreign advanced production technique and equipment. Combining with self-innovation, our company adopted special synthesis industrial technique, made use of aerogel’s characteristics of macropore, high specific surface and the same refractive index of various resins and developed new-type SA series high efficient Delusterant. Its original diameter varies from 10 and 15 nm, the average diameter of congeries is 2um, 3um, 4um, 5um (laser diffraction), and the porosity reaches 1.8-2.0ml/g. The product quality reaches the advanced international level. SA系列高档消光粉在涂料中的应用 The application of SA series high-grade delusterant powder to coatings SA系列高档消光粉产品特点 Characteristics of SA series high-grade delusterant powder 表一 产品技术指标 型号 项目 SA-220 SA-230 SA-250 SA-260 SA-220L SA-230L SA-250L SA-260L SiO2含量(干基),% 99.3 99.3 99.3 99.3 99.3 99.3 99.3 99.3 孔隙率,ml/g 1.8 1.8 2.0 2.0 1.8 1.8 2.0 2.0 吸油值,g/100g 280~330 270~320 260~310 250~300 280~330 270

文档评论(0)

wujianz + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档