使用须知INSTRUCTIONS - Incomp.PDF

RIGOL 使用须知 INSTRUCTIONS 本产品可使用多种电压输入模式，用户可根据需要 Various voltage input modes are provided in this 调整输入电压档位以及保险管型号。 product, which enables users to adjust the input voltage scale and fuse type as desired. 电压档位选择器位于仪器后面板电源插孔的上方， The voltage scale selector is located over the supply 保险管位于电源插孔下方的保险管座内（仪器在出 hub on the rear panel of the instrument, while fuse 厂前已安装了一个保险管）。欲调整输入电压档位 is within the fuse base below the supply hub (note 和更换保险管，请参考下面的步骤： that a fuse has been installed before leaving factory). To adjust the scale and replace fuse, 第一步：确保电源已经切断。用工具将电压档位选 following the steps below. 择器调整到所需档位； Step 1: Cut off the power supply, and then adjust 第二步：用工具按下卡舌（图中虚线箭头所指位 the voltage selector to desired scale with a tool; 置），然后拔出保险管座； Step 2: Press down the block with a tool (in the 第三步：根据输入电压选择并更换保险管（保险管 direction of dotted arrow in the figure), and then 规格见下表）； pull out the fuse base; Step 3: Select and change a new fuse according to 第四步：将保险管座重新装入卡槽中。 input voltage (see specifications listed in the