- 1、本文档共5页,可阅读全部内容。
- 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
间隙对不等厚板激光拼焊焊缝质量的影响及其补偿方法研究
1, 2, 3 1 1 1
陈 东 赵明扬 朱天旭 朱思俊
1. 中国科学院沈阳自动化研究所, 沈阳, 110016 2. 中国科学院研究生院, 北京, 100049
3. 辽宁科技大学, 鞍 , 114044
: 焊缝凹陷是激光拼焊板的常见缺陷之一, 严重影响焊缝强度, 间隙是产生焊缝凹陷的主要原
因基于理论分析和工艺试验, 研究了间隙的产生原因和对焊缝质量的影响, 分析了间隙与工艺参数等
因素的关系研究结果表明: 在不等厚板激光拼焊中, 允许间隙的大小主要与偏移量板厚组合焊缝宽
度以及薄板最小熔宽有关, 薄板最小熔宽主要与钢板的材料有关可以采用正偏移量对间隙进行补偿
该研究通过建立最大允许间隙和偏移量的计算公式, 给出了间隙的偏移量补偿方法, 从而提高了激光拼
焊对间隙的适应能力该结果可为优化工艺参数提供理论指导
: ; ; ;
: T G456. 7; T G439. 4 : 1004 132X( 2011) 12 1489 05
ResearchonEffects of GaponWeld Qualityof Unequal- thickness
Blanks TailoredLaserWeldingandItsCompensation ethod
1, 2, 3 1 1 1
Chen Dong Zhao Ming ang Zhu T ianxu Zhu Sijun
1. Shen ang Institute of Automation of the Chinese Academ of Sciences, Shen ang , 110016
2. Graduate School of the Chinese Academ of Sciences, Beijing , 100049
3. Liaoning U niversit of Science and Technolog , Anshan, Liaoning , 114044
Abstract: Sunken w eld is one of the common defects of tailor w elded blanks, w hich seriousl
affects the strength of w eld, and gap is the main reason for sunken w eld. The effects of gap on w eld
qualit and reasons for gap w ere studied, and the relationship betw een gap and process parameters
w as discussed based on theoretical anal ses and experiments. The results show that gap r elates to
offset, blank thickness, w eld w idth and the minimum melting w idth of thinner blanks. The minimum
melting w idth of thinner blanks w as related to the mater ials of blanks. Positive offset can compensate
the harmful effects of gap. The models for the maximum gap and offset toler ance w ere proposed, and a
compensation method w as also given, thus the adaptabilit of the gap w as enhanced. The results can
provide theoretical guidance for the optimizat
您可能关注的文档
- 铝合金直接氧化形成siC/A1203/Al 复合材料的 - 宁波工程学院.PDF
- 银饰品中铜杂质含量的激光剥离一激光诱导击穿光谱定量分析.PDF
- 金雀山街道幼儿园远程研修简报第二期-兰山教育.PPT
- 铝合金T型接头双激光束双侧同步焊接温度场模拟.PDF
- 锅炉炉墙局部晃动分析及处理.PDF
- 锻造空气锤项目介绍-安阳锻压机械工业有限公司.PDF
- 钢筋混凝土梁受弯破坏试验指导书-建筑工程学院-郑州工业应用技术.DOC
- 通风系统用空气净化器颗粒物净化效果评价的研究-现代仪器与医疗.PDF
- 镧镁合金中碳量的测定-研究报告.DOC
- 长城汽车股份有限公司GREAT WALL MOTOR - HKEXnews.PDF
文档评论(0)