Min Ubec舵机分电板 产品特征： 双电源输入有效提高供电稳定性 .DOCVIP

Min Ubec舵机分电板 产品特征：技术参数：：重量：g 体积：mm（长）*mm（宽）*1mm（高） 工作温度：20-85 摄氏度 B 1-8通道输出端 C CDI熄火开关控制通道/接遥控器开关通道 D 海绵缓冲垫，接收机安放位置 E 接收机捆绑魔术扎带 F 输出电压调节4.8-9.7V G CDI工作电源指示灯 H CDI电源输出端 I CDI电源输入端 J CDI电源电压指示灯 K 分电板电源开关 L 输入/输出显示电压切换（需要配合分电板开关电压表使用） M 电池1输入端 N 电池2输入端 CDI电源供电指示灯状态： 绿灯长亮 绿灯闪烁 红灯长亮 红灯闪烁 电压高于4.8V 4.5-4.8V 4.2-4.5V 电压低于4.2V 为使您能顺利安全地使用本产品，请详细阅读产品使用说明书。如还有不明白的问题或对本产品有任何意见或建议可电邮至：rccskj@163.com/rccskj@ Min Power Box Ubec Produce features: Double power input to improve the stability of power supply, which can effectively avoids the accident cause by poor contact of a single block of power batteries. Compared with the traditional mechanical switch integrated electronic switch has a higher security and stability. Input / output voltage display switch Nine channels for input, and sixteen channels for output.(every one channel input with two channels output ), one channel CDI remote flameout switch. Integrated CDI remote flameout switch, making flying safer Independent CDI power supply socket. Receiver power completely separates with the CDI power, so you should not worry about that CDI arouses high frequency signal will interfere the receiver. Integrated 30ABEC ( MXA: 40A ), which can provide sufficient current to the actuator. 4.8-9.7V output voltage, to adapt to a variety of high and low voltage actuator. Independent 5V linear regulator which provide a separate pure working power supply to the receiver. Five leds display the distribution board’s working states. Special place is designed for receiver to avoid the accidental from bombing damage in receiver. Optional voltage meter of the distribution board can display real-time input/output voltage Technology parameters: Working voltage: 7-13V Steering?current,?voltage?:0-20A ,4.8-9 .7 V (factory?voltage?is?5.2V) Weight: 80g Volume:116mm(long)*88mm(wide)*13mm(height) Working temperature:-20℃ to 85℃. Function description: A 1-8 input channel B 1-8 output channel C CDI remote flameout switch