国家同步辐射研究中心TPS X-光光束线铍窗规格书 1 Specification of .DOCVIP

. 國家同步輻射研究中心TPS X-光光束線鈹窗規格書 Specification of beryllium windows for the TPS X-ray Beamlines at the NSRRC June, 2012 Copyright ? 2012 National Synchrotron Radiation Research Center (NSRRC). This document is the property of NSRRC. No exploitation or transfer of any information contained herein is permitted in the absence of an agreement with NSRRC, and neither the document nor any such information may be released without the written consent of NSRRC. National Synchrotron Radiation Research Center 101 Hsin-Ann Road, Hsinchu Science Park, Hsinchu 30076, Taiwan1. Introduction and scope This specification establishes the requirements for the design; supply of fabrication and assembly drawings; materials; manufacture; inspection; testing of all components requested in the contract; delivery of UHV beryllium windows for TPS X-ray beamlines at the NSRRC. 2. Basic qualifications of tenderers The specification is specified the beryllium windows used under UHV (2×10-10 Torr), high temperature (150℃) and high energy radiation﹙5~30 keV﹚conditions on the X-ray beamlines at synchrotron facilities. Tenderers shall provide the documents to demonstrate capabilities to manufacture and supply the 0.1μm polished IF-1 foil beryllium windows, such as the surface finish inspection reports, previous order and delivery documents for the 0.1μm polished IF-1 foil beryllium windows for the synchrotron facilities worldwide. 2. 廠商基本資格 此次採購的標的是超高真空精密拋光型鈹窗，其使用在同步輻射X光光束線超高真空(2×10-10 Torr)、高溫(150℃)及高能輻射(5~30 keV)的特殊環境下。投標廠商必須有製造或供應超高真空水冷式鈹窗及IF-1型鈹片拋光至表面粗造度達0.1μm以下之履約能力證明。投標時，廠商必須提供曾完成超高真空水冷式鈹窗及IF-1型鈹片拋光至表面粗造度達0.1μm之製造、供應及承做之證明文件，如表面粗造度達0.1μm IF-1型鈹窗之表面粗造度檢驗報告、訂單及合約。 3. Drawings The following drawings, of the issue in effect on date of invitation for bids, form a part of this specification to the extent specified herein. Drawings TPS 05A beryllium window I TPS 05A beryllium window II 4. Requirements 4.1 General These beryllium windows will be used to protect the machine and beamline vacuum at t