红外遥控控制步进电机.doc

唐 山 学 院 毕 业 设 计 设计题目：基于单片机的步进电机控制系统设计与实现 系 别： 信息工程系 班 级： 姓　 　名： 指 导 教 师： 2013年6月10 日本 关键词： Design and Implementation of Stepper Motor Control System Based on MCU Abstract Stepper motor is a kind of pure digital control motor and brushless dc motor controlled by electric pulse signal type. Stepper motor is the core of the modern orientation drive, widely used in machinery, electric power, textile, electronics, instruments, printing and aerospace, ships, weapons, and other areas of the defense industry, etc. The characteristics of the stepping motor control system based on single chip microcomputer include high stability, low cost, convenient control and wide application , etc. The stepper motor control system consists of core processor using the single chip processor, command input control module using IR remote control , display module using 12864 LCD and 28BYJ48 stepping motor module which using ULN2003 as driver. The infrared remote control with carrier for 38 KHZ is used as the control end of the user, which can convert the users’ commands into the infrared signal. The TL1838 can receive the infrared signal and convert it into electrical signal, which input to tSTC89C52.The MCU can obtain instructions of users by processing the incoming signal and control stepping motor of the 28BYJ48 type, the current status can be shown by 12864 LCD. Users could control acceleration, deceleration, forward, inversion for the stepping motor. The features of the control system of stepper motor includes high precision, stable running, convenient control and simple maintenance and wide application, etc. Key word: MCU; 12864 LCD; Stepper Motor; Infrared remote control目 录 1 引言 1 2 总体设计方案 2 2.1 系统设计原理 2 2.2 总体设计框图 2 3系统硬件模块的组成 3 3.1单片机控制模块 3 3.1.1 STC89C52主要结构 3 3.1.2 STC89C52功能特性描述 3 3.1.3 时钟电路 6 3.1.4复位电路 6 3.2 步进电机模块 7 3.2.1 步进电机简介 7 3.2.2步进电机的结构 8 3.2.3 28B