HP R186502.2Ah 规格书.doc

海 霸 能 源 集 团 Hipower Energy Group 锂离子电芯规格书 Specification For Lithium-ion Rechargeable Cell 电芯型号 : HPCell Type : HP R18650 -2200mAh Document No HPNY-ZY-SPEC-CR02 Version change date 2014-3-3 Version A/01 Pages 11 Approved Checked Designed 骆兆军 宋华杰 许加欣 Contents 目录 Preface 前言 Definition 定义 Rated capacity inimum capacity 标称容量 Standard charge method 标准充电方式 Standard discharge method 标准电方式 Cell type，bar code and dimensions 电芯型号，喷码及尺寸 Description and model 电芯说明及型号 Cell dimensions 电芯尺寸 Cell specification 电芯特性 Technical characteristic 技术要求 Cell usage conditions 电芯环境 Requirement of the testing equipment 测量仪表要求Electronic performance 电性能Environmental characteristics 环境适应性能 Safety characteristics 安全性能 Package picture 包装图片 Warning and cautions in handling the lithium-ion cell 电芯使用时警告事项及注意事项Contact information 联系方式  Preface 前言 This specification describes the type and dimensions, performance, technical characteristics, warning and caution of the lithium ion rechargeable cell. The specification only applies to 18650-2200mAh cell supplied by Hipower Energy Li-Ion Battery Co., Ltd. 本标准描述了圆柱型锂离子电芯的外型尺寸、特性、技术要求及注意事项。本标准适用于有限公司生产的圆柱型HP锂离子电芯。 Definition 定义 Rated capacityinimum capacity: 标称容量： Rated capacity: =2200mAh, minimum capacity: Cap=2100mAh. Under 22.5±2.5℃, It means the capacity value of being discharged by 5-hours rate to end voltage 2.75 V, which is signed Cap, the unit is mAh. 标称容量=2200mAh，指在22.5±2.5环境下，以小时率放电至终止电压 V时的容量，以C表示，单位为毫安培时(mAh)。 Standard charge method: 标准充电方式： Under 22.5±2.5, it can be charged to 4.2V with constant current of 0.5C, and then, charged continuously with constant voltage of 4.2V until the charged current is 0.01C. 指在22.5±2.5环境下，以0.C 的电流恒流充电至单体电芯电压4.2 V后，转为恒压4.2 V充电，至充电电流小于0.01C 时，停止充电。 Standard discharge method: 标准放电方式： Under 22.5±2.5, it can be discharged to the voltage of 2.75V with constant current of 0.5C. 指在22.5±2.5环境下，以0.C的电流恒流放电至单体电芯电压 V。 Cell type and dimensions电芯型号及尺寸 Description and model电芯说明及型号 Description: Cylindrical Li-ion rec