华为数据制作-TD新建站流程.docx

TD新建站脚本流程概要：TD新建脚本包含RNC脚本和NODBE脚本，其中RNC脚本分ATM传输类型和IP输类型；新建站需要准备的数据有基站频规数据、基站传输调单、RNC时隙与SDH对应表。具体格式内容如下图：基站RNC脚本制作ATM站点RNC脚本制作：ADD IMAGRP:SRN = 0, SN = 18, BT = AOUa, IMAGRPN = 44, MINLNKNUM = 1, IMAID = 44, FRMLEN = D128, DELAY = 200, IMAVER = V1.1, FLOWCTRLSWITCH = ON, FCINDEX = 1, DLYGB = 10, TRMLOADTHINDEX = 0;根据传输提供的传输单板号个单板类型添加IMAGRP信息,IMAGRPID 单RNC不重复ADD IMALNK:SRN = 0, SN = 18, IMALNKN = 94, IMAGRPSN = 18, IMAGRPN = 44;根据传输提供的端口号配置IMAGRP下IMALNK,根据规划配置，IMALNK号为传输提供传输端口号对应RNC传输单板端口号，可以根据RNC与传输时隙表对应得到。成都一般4条IMALNK。ADD SAALLNK:SRN = 0, SN = 2, SAALLNKN = 48, CARRYT = IMA, CARRYSRN = 0, CARRYSN = 18, CARRYIMAGRPN = 44, CARRYVPI = 1, CARRYVCI = 40, TXTRFX = 100, RXTRFX = 100, SAALLNKT = UNI, CCTMR = 1000, POLLTMR = 750, IDLETMR = 15000, RSPTMR = 15000, KEEPTMR = 2000, MAXCC = 4, MAXPD = 25, STATLEN = 67, WINDOWSIZE = 100;添加SAALNK链路，配置4条SAALNK链路，SAALNK框槽号为RNC下SPU单板的框槽号。ADD IPOAPVC:IPADDR = 172.50.43.65, PEERIPADDR = 172.50.43.76, CARRYT = IMA, CARRYSN = 18, CARRYIMAGRPN = 44, CARRYVPI = 1, CARRYVCI = 33, TXTRFX = 180, RXTRFX = 180, PEERT = IUB;根据规划IP配置基站路由信息，IP地址为SPU单板可用空闲的IP地址，对端IP为SPU 单板IP。ADD TNODEB:NODEBNAME = 荆竹坝路和荆竹西路交界处A, NODEBID = 4750, SRN = 0, SN = 2, SSN = 2, TNLBEARERTYPE = ATM_TRANS, TRANSDELAY = 10, SATELLITEIND = FALSE, NODEBTYPE = NORMAL, NODEBHWVER = HERT;根据规划基站名称添加基站ADD TNODEBLDR:NODEBNAME = 荆竹坝路和荆竹西路交界处A, DLLDRFIRSTACTION = QOSRENEGO, DLLDRSECONDACTION = NOACT, DLLDRTHIRDACTION = NOACT, DLLDRFOURTHACTION = NOACT, DLLDRFIFTHACTION = NOACT, DLLDRPSRTQOSRENEGRABNUM = 1, ULLDRFIRSTACTION = QOSRENEGO, ULLDRSECONDACTION = NOACT, ULLDRTHIRDACTION = NOACT, ULLDRFOURTHACTION = NOACT, ULLDRFIFTHACTION = NOACT, ULLDRPSRTQOSRENEGRABNUM = 1, CSINTERRATSHOULDBEHOUENUM = 1, PSINTERRATSHOULDBEHOUENUM = 1, CSINTERRATSHOULDNOTBEHOUENUM = 1, PSINTERRATSHOULDNOTBEHOUENUM = 1;添加小区负荷算法。ADD TNODEBALGOPARA:NODEBNAME = 荆竹坝路和荆竹西路交界处A, NODEBLDCALGOSWITCH = LDCSWITCH-0;添加小区算法；ADD ADJNODE:ANI = 100, NAME = 荆竹坝路和荆竹西路交界处A, NODET = IUB, NODEBID = 4750, TRANST = ATM, IsROOTNODE =