现代静态图像编码技术.ppt

  1. 1、本文档共79页,可阅读全部内容。
  2. 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
现代静态图像编码技术

常用图像编码技术编码 静态图像编码 国际标准化委员会(联合图像专家小组—Joint Photograp Expert Group)制定的几种标准:JPEG,JPEG-SS,BIG JPEG2000 动态图像压缩标准: H.263,H.264, Mpeg2,mpeg4,mpeg7,Mpeg21 Jpeg简介 Jpeg是最常见的图片压缩标准,常用于存储图片和多媒体图片的压缩。 标准以离散余弦变换(DCT)为基础的有损压缩算法。 将一幅图像分割为更小的图像块(8*8,16*16), 然后对图像块进行余弦变换,变换后的浮点系数量化为整型数据,并且用原码表示;对原码数据进行熵编码,输出压缩码流。 Jpeg简介 Jpeg简介 采用了不同的哈夫曼表。 自适应编码编码采用QM编码器,通过自适应分类和自适应预测实现进一步压缩。 QM编码器是基于上下文的自适应编码器,是Q编码器的改进。 缺点: (1)容易产生码块效应、压缩效率有待提高; Jpeg简介 原因:余弦变换局限,即只能够对小的图像块进行变换,从而不能够充分利用像素之间的冗余。图象域分块造成方块效应。 2)对于二值图像,无法在统一框架中完成,另外设计算法标准。 3)对于无损压缩要求,由于DCT变换是非整型变换,另外制定标准。 Jpeg_less简介 无损压缩算法 直接在图像域进行压缩 利用已经编码过的邻居对当前像素值进行自适应预测 对预测后产生的差值进行自适应分类编码(Glomb算法)。 Jpeg_less简介 优点:算法简单,适合无损、近无损图像压缩;近无损压缩时,可以直接控制重建图像的误差。用于医学、高质量的遥感图像压缩。 缺点:直接在图像域编码,又采用自适应预测技术,对误码十分敏感;输出码率不可控。 Jpeg-less Causal template used for context modelling and prediction Context determination After a number of samples have been coded scanning from left to right and from top to bottom, the sample x shall be encoded. The context at this sample shall be determined by the previously reconstructed values Ra, Rb, Rc, and Rd corresponding to the samples a, b, c, and d as shown above, respectively. In lossless coding, the reconstructed values are identical to those of the source image data. The steps in context determination, to be performed in the presented order, are the following: Local gradient computation The first step in the context determination procedure shall be to compute the local gradient values, D1, D2, D3 of the neighbourhood samples. Mode selection If the local gradients are all zero (for lossless coding), or their absolute values are less than or equal to NEAR, the allowed error for near-lossless coding, the encoder shall enter the run mode, otherwise the encoder shall enter the regular mode. The mode selection procedure is specified. Local gradient quantization The context determination procedure shall continue by quantizing D1, D2, and D3 according to the procedure specified as follows. For this

文档评论(0)

dajuhyy + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档