在Solaris10中添加新硬盘并分区持载资料.doc

? (VMware)Solaris 10添加新硬盘 一：装载硬盘到SUN主机，开机进入系统。 二：运行format命令，先选择要进行分区格式化的磁盘 bash-3.2# format??????? #查看已经挂接上的硬盘Searching for disks...doneAVAILABLE DISK SELECTIONS:?????? 0. c1t0d0 VMware,-VMware Virtual -1.0? cyl 1955 alt 2 hd 255 sec 63??????????/pci@0,0/pci15ad,1976@10/sd@0,0?????? 1. c1t1d0 VMware,-VMware Virtual -1.0? cyl 1021 alt 2 hd 64 sec 32??????????/pci@0,0/pci15ad,1976@10/sd@1,0Specify disk (enter its number): 1????? #选择1硬盘selecting c1t1d0?[disk formatted] FORMAT MENU:??????? disk?????? - select a disk??????? type?????? - select (define) a disk type??????? partition? - select (define) a partition table??????? current??? - describe the current disk??????? format???? - format and analyze the disk??????? fdisk????? - run the fdisk program??????? repair???? - repair a defective sector??????? label????? - write label to the disk??????? analyze??? - surface analysis??????? defect???? - defect list management??????? backup???? - search for backup labels??????? verify???? - read and display labels??????? save?????? - save new disk/partition definitions??????? inquiry??? - show vendor, product and revision??????? volname??? - set 8-character volume name??????? !cmd???? - execute cmd, then return??????? quit 三：输入命令fdisk，对硬盘进行分区后，退出fdisk界面。format p??? #新硬盘，要先用fdisk格式化后，才能用partition进行分区，不然会有提示如下：Please run fdisk first format fdiskNo fdisk table exists. The default partition for the disk is: ? a 100% SOLARIS System partition Type y to accept the default partition,? otherwise type n to edit the?partition table.y 四：输入命令partition，在格式化硬盘后，进行分区format p???????????PARTITION MENU:??????? 0????? - change `0 partition??????? 1????? - change `1 partition??????? 2????? - change `2 partition??????? 3????? - change `3 partition??????? 4????? - change `4 partition??????? 5????? - change `5 partition??????? 6????? - change `6 partition??????? 7????? - change `7 partition??????? select - select a predefined table??????? modify - modify a pre