protel快捷方式（Protel shortcuts）.doc

protel快捷方式（Protel shortcuts） TAB: after the element is selected, the property of the element can be displayed. PAGEUP: zoom in on the mouse pointer; PAGEDOWN: center the mouse in the center and zoom out; HOME: in center, the position of the drawing from the original cursor is removed to the center of the workspace. END: update the graphics in the drawing area; Four direction keys: used to gradually move in all directions; F -- U: printing Settings; F -- P: open the printer; F -- N: new file F -- O: open the file F -- S: save the file F -- V: print preview E -- U: cancel the previous operation E, F: look for E - S: choose E - D: delete E - G: aligned, E - G - left aligned V - D: shows the entire graphics area; V -- F: displays all the components; V -- A: regional magnification V -- E: the elements in the general election V - P: zoom in with a mouse click V - O: narrow V -- 5, 1, 2, 4 is 50%, 10%, 200%, 400% V -- N: move the mouse to the center; = HOME V - R: update view; = END V -- T: toolbar selection V -- W: workspace panel selection; V -- G: grid option; C -- open the project shortcut menu in the view area P -- B: place the bus P -- U: place the bus interface P -- P: place the component P -- J: put the contacts P -- O: place the power P - W: attachment P -- N: place the network number P -- R: place IO port P -- T: place the text P -- D: drawing toolbar D -- B: browse the library D -- L: add/remove libraries D -- M: production library T -- : open the tool menu R -- : open the report menu; W -- : open the window menu Protel DXP provides three wire extension modes, which are used for horizontal/vertical switching. SHIFT + space for horizontal/vertical / 45 degrees and any Angle switch; When the element is placed, press the X key to achieve the horizontal turn; So Im going to flip it up and down; CTRL + Q opens the selection memory window, which can quickly select the components stored in the memory device. /6315147.html 1. Design browser shortcuts: Mouse left click